--- /dev/null
+ ******************** (C) COPYRIGHT 2010 NXPSemiconductors *******************\r
+ * @file USBDEV\USBCDC\abstract.txt \r
+ * @author NXP MCU SW Application Team\r
+ * @version 2.0\r
+ * @date \r
+ * @brief Description of the USBDEV CDC example.\r
+ ******************************************************************************\r
+ * Software that is described herein is for illustrative purposes only\r
+ * which provides customers with programming information regarding the\r
+ * products. This software is supplied "AS IS" without any warranties.\r
+ * NXP Semiconductors assumes no responsibility or liability for the\r
+ * use of the software, conveys no license or title under any patent,\r
+ * copyright, or mask work right to the product. NXP Semiconductors\r
+ * reserves the right to make changes in the software without\r
+ * notification. NXP Semiconductors also make no representation or\r
+ * warranty that such application will be suitable for the specified\r
+ * use without further testing or modification.\r
+ ******************************************************************************\r
+ \r
+@Example description:\r
+ Purpose:\r
+ This example describes how to use USBDEV on LPC1768 to demo the virtual COM port.\r
+ Process: \r
+ Clock Settings:\r
+ - XTAL = 12 MHz\r
+ - PLL = 400 MHz\r
+ - processor clock = CCLK = 100 MHz\r
+ - USB clock = 48 MHz\r
+ - CCLK / 4 clock = 25 MHz\r
+ \r
+ The PC will install a virtual COM port on the PC (see Driver Installation).\r
+ After installation an additional port "LPC17xx USB VCom Port(COMx)"\r
+ can be found under System/Hardware/Device Manager/Ports(COM&LPT).\r
+ Number "x" is not fixed as different PC configuration may have different \r
+ "x" displayed on the device manager. The USB host driver assigns "x" \r
+ dynamically based on the existing COM port configuration of the system.\r
+ \r
+ Testing the USB Virtual COM port with serial cable:\r
+\r
+ Open two Hyperterminal windows. \r
+ One with "LPC17xx USB VCom Port(COMx)" \r
+ One with "Communications Port (COM1)".\r
+ Connect PC port COM1 to the comport on the board and open "COM1" \r
+ and "COMx". Data from COM1 will be echoed on "COMx" and visa versa. \r
+ So, this is bi-directional communication between the physical COM\r
+ port 0 or 1 on the board and the virtual COM port COMx on host PC.\r
+ By default, COM PORT1 on the board is used for VirtualCOM port test.\r
+ In order to use COM PORT0 on the board, modify the definition PORT_NUM\r
+ from 1 to 0 in serial.h, recompile and reprogram the flash. RST jumper\r
+ needs to removed to start the Virtual COM port test. \r
+ \r
+@Driver Installation:\r
+ "Welcome to the Found New Hardware Wizard" appears\r
+ - select 'No, not this time'\r
+ - press 'Next'\r
+\r
+ - select 'Install from a list or specific location (Advanced)'\r
+ - press 'Next'\r
+\r
+ - select 'Search for the best driver in these locations'\r
+ - check 'include this location in the serach'\r
+ - set to <project folder>\r
+ - press 'Next'\r
+\r
+ "Hardware Installation" appears\r
+ "has not passed Windows Logo testing..."\r
+ - press 'Continue Anyway'\r
+\r
+ "Completing the Found New Hardware Wizard" appears\r
+ - press 'Finish'\r
+ \r
+@Directory contents:\r
+ \EWARM: includes EWARM (IAR) project and configuration files\r
+ \Keil: includes RVMDK (Keil)project and configuration files \r
+ \r
+ cdc.h: USB CDC (Communication Device) Definitions\r
+ cdcuser.h/.c: USB Communication Device Class User module\r
+ lpc17xx_libcfg.h: Library configuration file - include needed driver library for this example \r
+ serial.h/.c: serial port handling for LPC17xx\r
+ usb.h: USB Definitions\r
+ usbcfg.h: USB Custom Configuration\r
+ usbcore.h/.c: USB Core Module\r
+ usbdesc.h/.c: USB Descriptors\r
+ usbhw.h/.c: SB Hardware Layer Module\r
+ usbreg.h: USB Hardware Layer Definitions for NXP Semiconductors LPC \r
+ usbuser.h/.c: USB Custom User Module\r
+ vcomdemo.h/.c: main program \r
+ makefile: Example's makefile (to build with GNU toolchain)\r
+ lpc17xx-vom.inf: driver info for VCOM LPC17xx (used when Windows requires install driver)\r
+\r
+@How to run:\r
+ Hardware configuration: \r
+ This example was tested only on:\r
+ Keil MCB1700 with LPC1768 vers.1\r
+ These jumpers must be configured as following:\r
+ - VDDIO: ON\r
+ - VDDREGS: ON \r
+ - VBUS: ON\r
+ - D+: DEVICE\r
+ - D-: DEVICE\r
+ - UMODE: 1-2 (USB)\r
+ - E/U: 1-2 (USB)\r
+ - Remain jumpers: OFF\r
+ \r
+ Running mode:\r
+ This example can run on RAM/ROM mode.\r
+ \r
+ Note: If want to burn hex file to board by using Flash Magic, these jumpers need\r
+ to be connected:\r
+ - MCB1700 with LPC1768 ver.1:\r
+ + RST: ON\r
+ + ISP: ON\r
+ - IAR LPC1768 KickStart vers.A:\r
+ + RST_E: ON\r
+ + ISP_E: ON\r
+ \r
+ (Please reference "LPC1000 Software Development Toolchain" - chapter 4 "Creating and working with\r
+ LPC1000CMSIS project" for more information)\r
+ \r
+ Step to run:\r
+ - Step 1: Build example.\r
+ - Step 2: Burn hex file into board (if run on ROM mode)\r
+ - Step 3: Configure hardware as above instruction \r
+ - Step 4: Hit reset button to run example. (install driver if required)\r
+ - Step 5: After see UGL(USB Good Link) led on board turn on, open Device Manager > Ports (COM & LPT)\r
+ see if "LPC17xx USB Vcom Port (COMx)" appears or not. \r
+ - Step 6: Open one HyperTerminal for COM1 and other for COMx with below configuration:\r
+ - 9600 bps\r
+ - 8 data bits\r
+ - none parity\r
+ - 1 stop bit\r
+ - None flow control\r
+ - Step 7: Sure that you already connected COM1 port on board with PC. Type any character on \r
+ one HyperTerminal screen and see this character will be echoed in other screen and vice versa \r
+ \r
+ (Pls see "LPC17xx Example Description" document - chapter "Examples > USBDEV > USBCDC"\r
+ for more details)\r
+ \r
+@Tip:\r
+ - Open \EWARM\*.eww project file to run example on IAR\r
+ - Open \RVMDK\*.uvproj project file to run example on Keil
\ No newline at end of file
git.asbjorn.biz / rapper.git / blobdiff