+++ /dev/null
-/*----------------------------------------------------------------------------
- * U S B - K e r n e l
- *----------------------------------------------------------------------------
- * Name: usbreg.h
- * Purpose: USB Hardware Layer Definitions for NXP LPC Family MCUs
- * Version: V1.20
- *----------------------------------------------------------------------------
- * This software is supplied "AS IS" without any warranties, express,
- * implied or statutory, including but not limited to the implied
- * warranties of fitness for purpose, satisfactory quality and
- * noninfringement. Keil extends you a royalty-free right to reproduce
- * and distribute executable files created using this software for use
- * on NXP Semiconductors LPC family microcontroller devices only. Nothing
- * else gives you the right to use this software.
- *
- * Copyright (c) 2009 Keil - An ARM Company. All rights reserved.
- *---------------------------------------------------------------------------*/
-
-#ifndef __USBREG_H
-#define __USBREG_H
-
-/* Device Interrupt Bit Definitions */
-#define FRAME_INT 0x00000001
-#define EP_FAST_INT 0x00000002
-#define EP_SLOW_INT 0x00000004
-#define DEV_STAT_INT 0x00000008
-#define CCEMTY_INT 0x00000010
-#define CDFULL_INT 0x00000020
-#define RxENDPKT_INT 0x00000040
-#define TxENDPKT_INT 0x00000080
-#define EP_RLZED_INT 0x00000100
-#define ERR_INT 0x00000200
-
-/* Rx & Tx Packet Length Definitions */
-#define PKT_LNGTH_MASK 0x000003FF
-#define PKT_DV 0x00000400
-#define PKT_RDY 0x00000800
-
-/* USB Control Definitions */
-#define CTRL_RD_EN 0x00000001
-#define CTRL_WR_EN 0x00000002
-
-/* Command Codes */
-#define CMD_SET_ADDR 0x00D00500
-#define CMD_CFG_DEV 0x00D80500
-#define CMD_SET_MODE 0x00F30500
-#define CMD_RD_FRAME 0x00F50500
-#define DAT_RD_FRAME 0x00F50200
-#define CMD_RD_TEST 0x00FD0500
-#define DAT_RD_TEST 0x00FD0200
-#define CMD_SET_DEV_STAT 0x00FE0500
-#define CMD_GET_DEV_STAT 0x00FE0500
-#define DAT_GET_DEV_STAT 0x00FE0200
-#define CMD_GET_ERR_CODE 0x00FF0500
-#define DAT_GET_ERR_CODE 0x00FF0200
-#define CMD_RD_ERR_STAT 0x00FB0500
-#define DAT_RD_ERR_STAT 0x00FB0200
-#define DAT_WR_BYTE(x) (0x00000100 | ((x) << 16))
-#define CMD_SEL_EP(x) (0x00000500 | ((x) << 16))
-#define DAT_SEL_EP(x) (0x00000200 | ((x) << 16))
-#define CMD_SEL_EP_CLRI(x) (0x00400500 | ((x) << 16))
-#define DAT_SEL_EP_CLRI(x) (0x00400200 | ((x) << 16))
-#define CMD_SET_EP_STAT(x) (0x00400500 | ((x) << 16))
-#define CMD_CLR_BUF 0x00F20500
-#define DAT_CLR_BUF 0x00F20200
-#define CMD_VALID_BUF 0x00FA0500
-
-/* Device Address Register Definitions */
-#define DEV_ADDR_MASK 0x7F
-#define DEV_EN 0x80
-
-/* Device Configure Register Definitions */
-#define CONF_DVICE 0x01
-
-/* Device Mode Register Definitions */
-#define AP_CLK 0x01
-#define INAK_CI 0x02
-#define INAK_CO 0x04
-#define INAK_II 0x08
-#define INAK_IO 0x10
-#define INAK_BI 0x20
-#define INAK_BO 0x40
-
-/* Device Status Register Definitions */
-#define DEV_CON 0x01
-#define DEV_CON_CH 0x02
-#define DEV_SUS 0x04
-#define DEV_SUS_CH 0x08
-#define DEV_RST 0x10
-
-/* Error Code Register Definitions */
-#define ERR_EC_MASK 0x0F
-#define ERR_EA 0x10
-
-/* Error Status Register Definitions */
-#define ERR_PID 0x01
-#define ERR_UEPKT 0x02
-#define ERR_DCRC 0x04
-#define ERR_TIMOUT 0x08
-#define ERR_EOP 0x10
-#define ERR_B_OVRN 0x20
-#define ERR_BTSTF 0x40
-#define ERR_TGL 0x80
-
-/* Endpoint Select Register Definitions */
-#define EP_SEL_F 0x01
-#define EP_SEL_ST 0x02
-#define EP_SEL_STP 0x04
-#define EP_SEL_PO 0x08
-#define EP_SEL_EPN 0x10
-#define EP_SEL_B_1_FULL 0x20
-#define EP_SEL_B_2_FULL 0x40
-
-/* Endpoint Status Register Definitions */
-#define EP_STAT_ST 0x01
-#define EP_STAT_DA 0x20
-#define EP_STAT_RF_MO 0x40
-#define EP_STAT_CND_ST 0x80
-
-/* Clear Buffer Register Definitions */
-#define CLR_BUF_PO 0x01
-
-
-/* DMA Interrupt Bit Definitions */
-#define EOT_INT 0x01
-#define NDD_REQ_INT 0x02
-#define SYS_ERR_INT 0x04
-
-
-#endif /* __USBREG_H */