Rename new_cmsis to src
[rapper.git] / src / usb / cdc.h
diff --git a/src/usb/cdc.h b/src/usb/cdc.h
new file mode 100755 (executable)
index 0000000..7bb2abf
--- /dev/null
@@ -0,0 +1,283 @@
+/*----------------------------------------------------------------------------
+ *      U S B  -  K e r n e l
+ *----------------------------------------------------------------------------
+ *      Name:    CDC.h
+ *      Purpose: USB Communication Device Class Definitions
+ * Version: V1.20
+ *----------------------------------------------------------------------------
+ *      This software is supplied "AS IS" without any warranties, express,
+ *      implied or statutory, including but not limited to the implied
+ *      warranties of fitness for purpose, satisfactory quality and
+ *      noninfringement. Keil extends you a royalty-free right to reproduce
+ *      and distribute executable files created using this software for use
+ *      on NXP Semiconductors LPC family microcontroller devices only. Nothing
+ *      else gives you the right to use this software.
+ *
+ * Copyright (c) 2009 Keil - An ARM Company. All rights reserved.
+ *---------------------------------------------------------------------------*/
+
+#ifndef __CDC_H
+#define __CDC_H
+#include "lpc_types.h"
+
+#if defined   (  __GNUC__  )
+#define __packed __attribute__((__packed__))
+#endif
+/*----------------------------------------------------------------------------
+ *      Definitions  based on usbcdc11.pdf (www.usb.org)
+ *---------------------------------------------------------------------------*/
+// Communication device class specification version 1.10
+#define CDC_V1_10                               0x0110
+
+// Communication interface class code
+// (usbcdc11.pdf, 4.2, Table 15)
+#define CDC_COMMUNICATION_INTERFACE_CLASS       0x02
+
+// Communication interface class subclass codes
+// (usbcdc11.pdf, 4.3, Table 16)
+#define CDC_DIRECT_LINE_CONTROL_MODEL           0x01
+#define CDC_ABSTRACT_CONTROL_MODEL              0x02
+#define CDC_TELEPHONE_CONTROL_MODEL             0x03
+#define CDC_MULTI_CHANNEL_CONTROL_MODEL         0x04
+#define CDC_CAPI_CONTROL_MODEL                  0x05
+#define CDC_ETHERNET_NETWORKING_CONTROL_MODEL   0x06
+#define CDC_ATM_NETWORKING_CONTROL_MODEL        0x07
+
+// Communication interface class control protocol codes
+// (usbcdc11.pdf, 4.4, Table 17)
+#define CDC_PROTOCOL_COMMON_AT_COMMANDS         0x01
+
+// Data interface class code
+// (usbcdc11.pdf, 4.5, Table 18)
+#define CDC_DATA_INTERFACE_CLASS                0x0A
+
+// Data interface class protocol codes
+// (usbcdc11.pdf, 4.7, Table 19)
+#define CDC_PROTOCOL_ISDN_BRI                   0x30
+#define CDC_PROTOCOL_HDLC                       0x31
+#define CDC_PROTOCOL_TRANSPARENT                0x32
+#define CDC_PROTOCOL_Q921_MANAGEMENT            0x50
+#define CDC_PROTOCOL_Q921_DATA_LINK             0x51
+#define CDC_PROTOCOL_Q921_MULTIPLEXOR           0x52
+#define CDC_PROTOCOL_V42                        0x90
+#define CDC_PROTOCOL_EURO_ISDN                  0x91
+#define CDC_PROTOCOL_V24_RATE_ADAPTATION        0x92
+#define CDC_PROTOCOL_CAPI                       0x93
+#define CDC_PROTOCOL_HOST_BASED_DRIVER          0xFD
+#define CDC_PROTOCOL_DESCRIBED_IN_PUFD          0xFE
+
+// Type values for bDescriptorType field of functional descriptors
+// (usbcdc11.pdf, 5.2.3, Table 24)
+#define CDC_CS_INTERFACE                        0x24
+#define CDC_CS_ENDPOINT                         0x25
+
+// Type values for bDescriptorSubtype field of functional descriptors
+// (usbcdc11.pdf, 5.2.3, Table 25)
+#define CDC_HEADER                              0x00
+#define CDC_CALL_MANAGEMENT                     0x01
+#define CDC_ABSTRACT_CONTROL_MANAGEMENT         0x02
+#define CDC_DIRECT_LINE_MANAGEMENT              0x03
+#define CDC_TELEPHONE_RINGER                    0x04
+#define CDC_REPORTING_CAPABILITIES              0x05
+#define CDC_UNION                               0x06
+#define CDC_COUNTRY_SELECTION                   0x07
+#define CDC_TELEPHONE_OPERATIONAL_MODES         0x08
+#define CDC_USB_TERMINAL                        0x09
+#define CDC_NETWORK_CHANNEL                     0x0A
+#define CDC_PROTOCOL_UNIT                       0x0B
+#define CDC_EXTENSION_UNIT                      0x0C
+#define CDC_MULTI_CHANNEL_MANAGEMENT            0x0D
+#define CDC_CAPI_CONTROL_MANAGEMENT             0x0E
+#define CDC_ETHERNET_NETWORKING                 0x0F
+#define CDC_ATM_NETWORKING                      0x10
+
+// CDC class-specific request codes
+// (usbcdc11.pdf, 6.2, Table 46)
+// see Table 45 for info about the specific requests.
+#define CDC_SEND_ENCAPSULATED_COMMAND           0x00
+#define CDC_GET_ENCAPSULATED_RESPONSE           0x01
+#define CDC_SET_COMM_FEATURE                    0x02
+#define CDC_GET_COMM_FEATURE                    0x03
+#define CDC_CLEAR_COMM_FEATURE                  0x04
+#define CDC_SET_AUX_LINE_STATE                  0x10
+#define CDC_SET_HOOK_STATE                      0x11
+#define CDC_PULSE_SETUP                         0x12
+#define CDC_SEND_PULSE                          0x13
+#define CDC_SET_PULSE_TIME                      0x14
+#define CDC_RING_AUX_JACK                       0x15
+#define CDC_SET_LINE_CODING                     0x20
+#define CDC_GET_LINE_CODING                     0x21
+#define CDC_SET_CONTROL_LINE_STATE              0x22
+#define CDC_SEND_BREAK                          0x23
+#define CDC_SET_RINGER_PARMS                    0x30
+#define CDC_GET_RINGER_PARMS                    0x31
+#define CDC_SET_OPERATION_PARMS                 0x32
+#define CDC_GET_OPERATION_PARMS                 0x33
+#define CDC_SET_LINE_PARMS                      0x34
+#define CDC_GET_LINE_PARMS                      0x35
+#define CDC_DIAL_DIGITS                         0x36
+#define CDC_SET_UNIT_PARAMETER                  0x37
+#define CDC_GET_UNIT_PARAMETER                  0x38
+#define CDC_CLEAR_UNIT_PARAMETER                0x39
+#define CDC_GET_PROFILE                         0x3A
+#define CDC_SET_ETHERNET_MULTICAST_FILTERS      0x40
+#define CDC_SET_ETHERNET_PMP_FILTER             0x41
+#define CDC_GET_ETHERNET_PMP_FILTER             0x42
+#define CDC_SET_ETHERNET_PACKET_FILTER          0x43
+#define CDC_GET_ETHERNET_STATISTIC              0x44
+#define CDC_SET_ATM_DATA_FORMAT                 0x50
+#define CDC_GET_ATM_DEVICE_STATISTICS           0x51
+#define CDC_SET_ATM_DEFAULT_VC                  0x52
+#define CDC_GET_ATM_VC_STATISTICS               0x53
+
+// Communication feature selector codes
+// (usbcdc11.pdf, 6.2.2..6.2.4, Table 47)
+#define CDC_ABSTRACT_STATE                      0x01
+#define CDC_COUNTRY_SETTING                     0x02
+
+// Feature Status returned for ABSTRACT_STATE Selector
+// (usbcdc11.pdf, 6.2.3, Table 48)
+#define CDC_IDLE_SETTING                        (1 << 0)
+#define CDC_DATA_MULTPLEXED_STATE               (1 << 1)
+
+
+// Control signal bitmap values for the SetControlLineState request
+// (usbcdc11.pdf, 6.2.14, Table 51)
+#define CDC_DTE_PRESENT                         (1 << 0)
+#define CDC_ACTIVATE_CARRIER                    (1 << 1)
+
+// CDC class-specific notification codes
+// (usbcdc11.pdf, 6.3, Table 68)
+// see Table 67 for Info about class-specific notifications
+#define CDC_NOTIFICATION_NETWORK_CONNECTION     0x00
+#define CDC_RESPONSE_AVAILABLE                  0x01
+#define CDC_AUX_JACK_HOOK_STATE                 0x08
+#define CDC_RING_DETECT                         0x09
+#define CDC_NOTIFICATION_SERIAL_STATE           0x20
+#define CDC_CALL_STATE_CHANGE                   0x28
+#define CDC_LINE_STATE_CHANGE                   0x29
+#define CDC_CONNECTION_SPEED_CHANGE             0x2A
+
+// UART state bitmap values (Serial state notification).
+// (usbcdc11.pdf, 6.3.5, Table 69)
+#define CDC_SERIAL_STATE_OVERRUN                (1 << 6)  // receive data overrun error has occurred
+#define CDC_SERIAL_STATE_PARITY                 (1 << 5)  // parity error has occurred
+#define CDC_SERIAL_STATE_FRAMING                (1 << 4)  // framing error has occurred
+#define CDC_SERIAL_STATE_RING                   (1 << 3)  // state of ring signal detection
+#define CDC_SERIAL_STATE_BREAK                  (1 << 2)  // state of break detection
+#define CDC_SERIAL_STATE_TX_CARRIER             (1 << 1)  // state of transmission carrier
+#define CDC_SERIAL_STATE_RX_CARRIER             (1 << 0)  // state of receiver carrier
+
+
+/*----------------------------------------------------------------------------
+ *      Structures  based on usbcdc11.pdf (www.usb.org)
+ *---------------------------------------------------------------------------*/
+
+// Header functional descriptor
+// (usbcdc11.pdf, 5.2.3.1)
+// This header must precede any list of class-specific descriptors.
+
+#if defined     (  __CC_ARM  )
+typedef __packed struct _CDC_HEADER_DESCRIPTOR{
+#elif defined (  __GNUC__  )
+typedef struct __packed  _CDC_HEADER_DESCRIPTOR{
+#elif defined   (  __IAR_SYSTEMS_ICC__  )
+#pragma pack(1)
+typedef struct _CDC_HEADER_DESCRIPTOR {
+#endif
+  uint8_t bFunctionLength;                     // size of this descriptor in bytes
+  uint8_t bDescriptorType;                     // CS_INTERFACE descriptor type
+  uint8_t bDescriptorSubtype;                  // Header functional descriptor subtype
+  uint16_t bcdCDC;                              // USB CDC specification release version
+} CDC_HEADER_DESCRIPTOR;
+
+//Call management functional descriptor
+// (usbcdc11.pdf, 5.2.3.2)
+// Describes the processing of calls for the communication class interface.
+#if defined     (  __CC_ARM  )
+typedef __packed struct _CDC_CALL_MANAGEMENT_DESCRIPTOR{
+#elif defined (  __GNUC__  )
+typedef struct __packed  _CDC_CALL_MANAGEMENT_DESCRIPTOR{
+#elif defined   (  __IAR_SYSTEMS_ICC__  )
+#pragma pack(1)
+typedef struct _CDC_CALL_MANAGEMENT_DESCRIPTOR {
+#endif
+  uint8_t bFunctionLength;                     // size of this descriptor in bytes
+  uint8_t bDescriptorType;                     // CS_INTERFACE descriptor type
+  uint8_t bDescriptorSubtype;                  // call management functional descriptor subtype
+  uint8_t bmCapabilities;                      // capabilities that this configuration supports
+  uint8_t bDataInterface;                      // interface number of the data class interface used for call management (optional)
+} CDC_CALL_MANAGEMENT_DESCRIPTOR;
+
+// Abstract control management functional descriptor
+// (usbcdc11.pdf, 5.2.3.3)
+// Describes the command supported by the communication interface class with the Abstract Control Model subclass code.
+#if defined     (  __CC_ARM  )
+typedef __packed struct _CDC_ABSTRACT_CONTROL_MANAGEMENT_DESCRIPTOR{
+#elif defined (  __GNUC__  )
+typedef struct __packed  _CDC_ABSTRACT_CONTROL_MANAGEMENT_DESCRIPTOR{
+#elif defined   (  __IAR_SYSTEMS_ICC__  )
+#pragma pack(1)
+typedef struct _CDC_ABSTRACT_CONTROL_MANAGEMENT_DESCRIPTOR {
+#endif
+  uint8_t bFunctionLength;                     // size of this descriptor in bytes
+  uint8_t bDescriptorType;                     // CS_INTERFACE descriptor type
+  uint8_t bDescriptorSubtype;                  // abstract control management functional descriptor subtype
+  uint8_t bmCapabilities;                      // capabilities supported by this configuration
+} CDC_ABSTRACT_CONTROL_MANAGEMENT_DESCRIPTOR;
+
+// Union functional descriptors
+// (usbcdc11.pdf, 5.2.3.8)
+// Describes the relationship between a group of interfaces that can be considered to form a functional unit.
+#if defined     (  __CC_ARM  )
+typedef __packed struct _CDC_UNION_DESCRIPTOR{
+#elif defined (  __GNUC__  )
+typedef struct __packed  _CDC_UNION_DESCRIPTOR{
+#elif defined   (  __IAR_SYSTEMS_ICC__  )
+#pragma pack(1)
+typedef struct _CDC_UNION_DESCRIPTOR {
+#endif
+  uint8_t bFunctionLength;                     // size of this descriptor in bytes
+  uint8_t bDescriptorType;                     // CS_INTERFACE descriptor type
+  uint8_t bDescriptorSubtype;                  // union functional descriptor subtype
+  uint8_t bMasterInterface;                    // interface number designated as master
+} CDC_UNION_DESCRIPTOR;
+
+// Union functional descriptors with one slave interface
+// (usbcdc11.pdf, 5.2.3.8)
+#if defined     (  __CC_ARM  )
+typedef __packed struct _CDC_UNION_1SLAVE_DESCRIPTOR{
+#elif defined (  __GNUC__  )
+typedef struct __packed  _CDC_UNION_1SLAVE_DESCRIPTOR{
+#elif defined   (  __IAR_SYSTEMS_ICC__  )
+#pragma pack(1)
+typedef struct _CDC_UNION_1SLAVE_DESCRIPTOR {
+#endif
+  CDC_UNION_DESCRIPTOR sUnion;              // Union functional descriptor
+  uint8_t                 bSlaveInterfaces[1]; // Slave interface 0
+} CDC_UNION_1SLAVE_DESCRIPTOR;
+
+//  Line coding structure
+//  Format of the data returned when a GetLineCoding request is received
+// (usbcdc11.pdf, 6.2.13)
+#if defined     (  __CC_ARM  )
+typedef __packed struct _CDC_LINE_CODING{
+#elif defined (  __GNUC__  )
+typedef struct __packed  _CDC_LINE_CODING{
+#elif defined   (  __IAR_SYSTEMS_ICC__  )
+#pragma pack(1)
+typedef struct _CDC_LINE_CODING {
+#endif
+  uint32_t dwDTERate;                          // Data terminal rate in bits per second
+  uint8_t  bCharFormat;                        // Number of stop bits
+  uint8_t  bParityType;                        // Parity bit type
+  uint8_t  bDataBits;                          // Number of data bits
+} CDC_LINE_CODING;
+
+// Notification header
+// Data sent on the notification endpoint must follow this header.
+// see  USB_SETUP_PACKET in file usb.h
+typedef USB_SETUP_PACKET CDC_NOTIFICATION_HEADER;
+
+#endif /* __CDC_H */
+