X-Git-Url: http://git.asbjorn.biz/?p=rapper.git;a=blobdiff_plain;f=new_cmsis%2Fusb%2Fusbreg.h;fp=new_cmsis%2Fusb%2Fusbreg.h;h=fe1d58d18f9d71c6072eed707ccd0fb24e9303f6;hp=0000000000000000000000000000000000000000;hb=0163b16211dc58d6619b923b370be8491fb984cb;hpb=ed7a4dbc9f9d17923417de5ebc515e76e979c6f9

diff --git a/new_cmsis/usb/usbreg.h b/new_cmsis/usb/usbreg.h
new file mode 100755
index 0000000..fe1d58d
--- /dev/null
+++ b/new_cmsis/usb/usbreg.h
@@ -0,0 +1,130 @@
+/*----------------------------------------------------------------------------
+ *      U S B  -  K e r n e l
+ *----------------------------------------------------------------------------
+ * Name:    usbreg.h
+ * Purpose: USB Hardware Layer Definitions for NXP LPC Family MCUs
+ * Version: V1.20
+ *----------------------------------------------------------------------------
+ *      This software is supplied "AS IS" without any warranties, express,
+ *      implied or statutory, including but not limited to the implied
+ *      warranties of fitness for purpose, satisfactory quality and
+ *      noninfringement. Keil extends you a royalty-free right to reproduce
+ *      and distribute executable files created using this software for use
+ *      on NXP Semiconductors LPC family microcontroller devices only. Nothing 
+ *      else gives you the right to use this software.
+ *
+ * Copyright (c) 2009 Keil - An ARM Company. All rights reserved.
+ *---------------------------------------------------------------------------*/
+
+#ifndef __USBREG_H
+#define __USBREG_H
+
+/* Device Interrupt Bit Definitions */
+#define FRAME_INT           0x00000001
+#define EP_FAST_INT         0x00000002
+#define EP_SLOW_INT         0x00000004
+#define DEV_STAT_INT        0x00000008
+#define CCEMTY_INT          0x00000010
+#define CDFULL_INT          0x00000020
+#define RxENDPKT_INT        0x00000040
+#define TxENDPKT_INT        0x00000080
+#define EP_RLZED_INT        0x00000100
+#define ERR_INT             0x00000200
+
+/* Rx & Tx Packet Length Definitions */
+#define PKT_LNGTH_MASK      0x000003FF
+#define PKT_DV              0x00000400
+#define PKT_RDY             0x00000800
+
+/* USB Control Definitions */
+#define CTRL_RD_EN          0x00000001
+#define CTRL_WR_EN          0x00000002
+
+/* Command Codes */
+#define CMD_SET_ADDR        0x00D00500
+#define CMD_CFG_DEV         0x00D80500
+#define CMD_SET_MODE        0x00F30500
+#define CMD_RD_FRAME        0x00F50500
+#define DAT_RD_FRAME        0x00F50200
+#define CMD_RD_TEST         0x00FD0500
+#define DAT_RD_TEST         0x00FD0200
+#define CMD_SET_DEV_STAT    0x00FE0500
+#define CMD_GET_DEV_STAT    0x00FE0500
+#define DAT_GET_DEV_STAT    0x00FE0200
+#define CMD_GET_ERR_CODE    0x00FF0500
+#define DAT_GET_ERR_CODE    0x00FF0200
+#define CMD_RD_ERR_STAT     0x00FB0500
+#define DAT_RD_ERR_STAT     0x00FB0200
+#define DAT_WR_BYTE(x)     (0x00000100 | ((x) << 16))
+#define CMD_SEL_EP(x)      (0x00000500 | ((x) << 16))
+#define DAT_SEL_EP(x)      (0x00000200 | ((x) << 16))
+#define CMD_SEL_EP_CLRI(x) (0x00400500 | ((x) << 16))
+#define DAT_SEL_EP_CLRI(x) (0x00400200 | ((x) << 16))
+#define CMD_SET_EP_STAT(x) (0x00400500 | ((x) << 16))
+#define CMD_CLR_BUF         0x00F20500
+#define DAT_CLR_BUF         0x00F20200
+#define CMD_VALID_BUF       0x00FA0500
+
+/* Device Address Register Definitions */
+#define DEV_ADDR_MASK       0x7F
+#define DEV_EN              0x80
+
+/* Device Configure Register Definitions */
+#define CONF_DVICE          0x01
+
+/* Device Mode Register Definitions */
+#define AP_CLK              0x01
+#define INAK_CI             0x02
+#define INAK_CO             0x04
+#define INAK_II             0x08
+#define INAK_IO             0x10
+#define INAK_BI             0x20
+#define INAK_BO             0x40
+
+/* Device Status Register Definitions */
+#define DEV_CON             0x01
+#define DEV_CON_CH          0x02
+#define DEV_SUS             0x04
+#define DEV_SUS_CH          0x08
+#define DEV_RST             0x10
+
+/* Error Code Register Definitions */
+#define ERR_EC_MASK         0x0F
+#define ERR_EA              0x10
+
+/* Error Status Register Definitions */
+#define ERR_PID             0x01
+#define ERR_UEPKT           0x02
+#define ERR_DCRC            0x04
+#define ERR_TIMOUT          0x08
+#define ERR_EOP             0x10
+#define ERR_B_OVRN          0x20
+#define ERR_BTSTF           0x40
+#define ERR_TGL             0x80
+
+/* Endpoint Select Register Definitions */
+#define EP_SEL_F            0x01
+#define EP_SEL_ST           0x02
+#define EP_SEL_STP          0x04
+#define EP_SEL_PO           0x08
+#define EP_SEL_EPN          0x10
+#define EP_SEL_B_1_FULL     0x20
+#define EP_SEL_B_2_FULL     0x40
+
+/* Endpoint Status Register Definitions */
+#define EP_STAT_ST          0x01
+#define EP_STAT_DA          0x20
+#define EP_STAT_RF_MO       0x40
+#define EP_STAT_CND_ST      0x80
+
+/* Clear Buffer Register Definitions */
+#define CLR_BUF_PO          0x01
+
+
+/* DMA Interrupt Bit Definitions */
+#define EOT_INT             0x01
+#define NDD_REQ_INT         0x02
+#define SYS_ERR_INT         0x04
+
+
+#endif  /* __USBREG_H */