-# See if the linker supports building shared libraries.
-echo $ac_n "checking whether the linker ($LD) supports shared libraries""... $ac_c" 1>&6
-echo "configure:3197: checking whether the linker ($LD) supports shared libraries" >&5
-
-allow_undefined_flag=
-no_undefined_flag=
-need_lib_prefix=unknown
-need_version=unknown
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-archive_cmds=
-archive_expsym_cmds=
-old_archive_from_new_cmds=
-old_archive_from_expsyms_cmds=
-export_dynamic_flag_spec=
-whole_archive_flag_spec=
-thread_safe_flag_spec=
-hardcode_into_libs=no
-hardcode_libdir_flag_spec=
-hardcode_libdir_separator=
-hardcode_direct=no
-hardcode_minus_L=no
-hardcode_shlibpath_var=unsupported
-runpath_var=
-link_all_deplibs=unknown
-always_export_symbols=no
-export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
-# include_expsyms should be a list of space-separated symbols to be *always*
-# included in the symbol list
-include_expsyms=
-# exclude_expsyms can be an egrep regular expression of symbols to exclude
-# it will be wrapped by ` (' and `)$', so one must not match beginning or
-# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-# as well as any symbol that contains `d'.
-exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
-# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-# platforms (ab)use it in PIC code, but their linkers get confused if
-# the symbol is explicitly referenced. Since portable code cannot
-# rely on this symbol name, it's probably fine to never include it in
-# preloaded symbol tables.
-extract_expsyms_cmds=
-
-case $host_os in
-cygwin* | mingw* | pw32*)
- # FIXME: the MSVC++ port hasn't been tested in a loooong time
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- if test "$GCC" != yes; then
- with_gnu_ld=no
- fi
- ;;
-openbsd*)
- with_gnu_ld=no
- ;;
-esac
-
-ld_shlibs=yes
-if test "$with_gnu_ld" = yes; then
- # If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
-
- # See if GNU ld supports shared libraries.
- case $host_os in
- aix3* | aix4* | aix5*)
- # On AIX, the GNU linker is very broken
- # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available.
- ld_shlibs=no
- cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support. If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
- ;;
-
- amigaos*)
- archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
-
- # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
- # that the semantics of dynamic libraries on AmigaOS, at least up
- # to version 4, is to share data among multiple programs linked
- # with the same dynamic library. Since this doesn't match the
- # behavior of shared libraries on other platforms, we can use
- # them.
- ld_shlibs=no
- ;;
-
- beos*)
- if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
- allow_undefined_flag=unsupported
- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- ld_shlibs=no
- fi
- ;;
-
- cygwin* | mingw* | pw32*)
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- hardcode_libdir_flag_spec='-L$libdir'
- allow_undefined_flag=unsupported
- always_export_symbols=yes
-
- extract_expsyms_cmds='test -f $output_objdir/impgen.c || \
- sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~
- test -f $output_objdir/impgen.exe || (cd $output_objdir && \
- if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \
- else $CC -o impgen impgen.c ; fi)~
- $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def'
-
- old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib'
-
- # cygwin and mingw dlls have different entry points and sets of symbols
- # to exclude.
- # FIXME: what about values for MSVC?
- dll_entry=__cygwin_dll_entry@12
- dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~
- case $host_os in
- mingw*)
- # mingw values
- dll_entry=_DllMainCRTStartup@12
- dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~
- ;;
- esac
-
- # mingw and cygwin differ, and it's simplest to just exclude the union
- # of the two symbol sets.
- dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12
-
- # recent cygwin and mingw systems supply a stub DllMain which the user
- # can override, but on older systems we have to supply one (in ltdll.c)
- if test "x$lt_cv_need_dllmain" = "xyes"; then
- ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext "
- ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~
- test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
- else
- ltdll_obj=
- ltdll_cmds=
- fi
-
- # Extract the symbol export list from an `--export-all' def file,
- # then regenerate the def file from the symbol export list, so that
- # the compiled dll only exports the symbol export list.
- # Be careful not to strip the DATA tag left be newer dlltools.
- export_symbols_cmds="$ltdll_cmds"'
- $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
- sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'
-
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is.
- # If DATA tags from a recent dlltool are present, honour them!
- archive_expsym_cmds='if test "x`sed 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname-def;
- else
- echo EXPORTS > $output_objdir/$soname-def;
- _lt_hint=1;
- cat $export_symbols | while read symbol; do
- set dummy \$symbol;
- case \$# in
- 2) echo " \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
- 4) echo " \$2 \$3 \$4 ; " >> $output_objdir/$soname-def; _lt_hint=`expr \$_lt_hint - 1`;;
- *) echo " \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;;
- esac;
- _lt_hint=`expr 1 + \$_lt_hint`;
- done;
- fi~
- '"$ltdll_cmds"'
- $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
- $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
- $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
- $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~
- $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags'
- ;;
-
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
- wlarc=
- else
- archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- fi
- ;;
-
- solaris* | sysv5*)
- if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
- ld_shlibs=no
- cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
- elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs=no
- fi
- ;;
-
- sunos4*)
- archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- wlarc=
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- *)
- if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs=no
- fi
- ;;
- esac
-
- if test "$ld_shlibs" = yes; then
- runpath_var=LD_RUN_PATH
- hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
- export_dynamic_flag_spec='${wl}--export-dynamic'
- case $host_os in
- cygwin* | mingw* | pw32*)
- # dlltool doesn't understand --whole-archive et. al.
- whole_archive_flag_spec=
- ;;
- *)
- # ancient GNU ld didn't support --whole-archive et. al.
- if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
- whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- whole_archive_flag_spec=
- fi
- ;;
- esac
- fi
-else
- # PORTME fill in a description of your system's linker (not GNU ld)
- case $host_os in
- aix3*)
- allow_undefined_flag=unsupported
- always_export_symbols=yes
- archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
- # Note: this linker hardcodes the directories in LIBPATH if there
- # are no directories specified by -L.
- hardcode_minus_L=yes
- if test "$GCC" = yes && test -z "$link_static_flag"; then
- # Neither direct hardcoding nor static linking is supported with a
- # broken collect2.
- hardcode_direct=unsupported
- fi
- ;;
-
- aix4* | aix5*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- aix_use_runtimelinking=no
-
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[23]|aix4.[23].*|aix5*)
- for ld_flag in $LDFLAGS; do
- case $ld_flag in
- *-brtl*)
- aix_use_runtimelinking=yes
- break
- ;;
- esac
- done
- esac
-
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
-
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
- hardcode_direct=yes
- archive_cmds=''
- hardcode_libdir_separator=':'
- if test "$GCC" = yes; then
- case $host_os in aix4.[012]|aix4.[012].*)
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- hardcode_direct=yes
- else
- # We have old collect2
- hardcode_direct=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- hardcode_minus_L=yes
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_libdir_separator=
- fi
- esac
-
- shared_flag='-shared'
- else
- # not using gcc
- if test "$host_cpu" = ia64; then
- shared_flag='${wl}-G'
- else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
- else
- shared_flag='${wl}-bM:SRE'
- fi
- fi
- fi
-
- # It seems that -bexpall can do strange things, so it is better to
- # generate a list of symbols to export.
- always_export_symbols=yes
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other runtime loading flags (-brtl),
- # -berok will link without error, but may produce a broken library.
- allow_undefined_flag='-berok'
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
- archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
- hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
- allow_undefined_flag="-z nodefs"
- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
- else
- hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
- # Warning - without using the other run time loading flags,
- # -berok will link without error, but may produce a broken library.
- allow_undefined_flag='${wl}-berok'
- # This is a bit strange, but is similar to how AIX traditionally builds
- # it's shared libraries.
- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname'
- fi
- fi
- ;;
-
- amigaos*)
- archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- # see comment about different semantics on the GNU ld section
- ld_shlibs=no
- ;;
-
- cygwin* | mingw* | pw32*)
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- hardcode_libdir_flag_spec=' '
- allow_undefined_flag=unsupported
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # FIXME: Setting linknames here is a bad hack.
- archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
- # The linker will automatically build a .lib file if we build a DLL.
- old_archive_from_new_cmds='true'
- # FIXME: Should let the user specify the lib program.
- old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
- fix_srcfile_path='`cygpath -w "$srcfile"`'
- ;;
-
- darwin* | rhapsody*)
- case "$host_os" in
- rhapsody* | darwin1.[012])
- allow_undefined_flag='-undefined suppress'
- ;;
- *) # Darwin 1.3 on
- allow_undefined_flag='-flat_namespace -undefined suppress'
- ;;
- esac
- # FIXME: Relying on posixy $() will cause problems for
- # cross-compilation, but unfortunately the echo tests do not
- # yet detect zsh echo's removal of \ escapes. Also zsh mangles
- # `"' quotes if we put them in here... so don't!
- archive_cmds='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs && $CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib ${lib}-master.o $deplibs$linker_flags $(test .$module != .yes && echo -install_name $rpath/$soname $verstring)'
- # We need to add '_' to the symbols in $export_symbols first
- #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- whole_archive_flag_spec='-all_load $convenience'
- ;;
-
- freebsd1*)
- ld_shlibs=no
- ;;
-
- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
- # support. Future versions do this automatically, but an explicit c++rt0.o
- # does not break anything, and helps significantly (at the cost of a little
- # extra space).
- freebsd2.2*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
- freebsd2*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=yes
- hardcode_minus_L=yes
- hardcode_shlibpath_var=no
- ;;
-
- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd*)
- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- hpux9* | hpux10* | hpux11*)
- case $host_os in
- hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;;
- *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;;
- esac
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
- hardcode_direct=yes
- hardcode_minus_L=yes # Not in the search PATH, but as the default
- # location of the library.
- export_dynamic_flag_spec='${wl}-E'
- ;;
-
- irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- else
- archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec='-rpath $libdir'
- fi
- hardcode_libdir_separator=:
- link_all_deplibs=yes
- ;;
-
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
- else
- archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
- fi
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- newsos6)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=yes
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- hardcode_shlibpath_var=no
- ;;
-
- openbsd*)
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- export_dynamic_flag_spec='${wl}-E'
- else
- case "$host_os" in
- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-R$libdir'
- ;;
- *)
- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- ;;
- esac
- fi
- ;;
-
- os2*)
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- allow_undefined_flag=unsupported
- archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
- ;;
-
- osf3*)
- if test "$GCC" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- fi
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- ;;
-
- osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- else
- allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
-
- #Both c and cxx compiler support -rpath directly
- hardcode_libdir_flag_spec='-rpath $libdir'
- fi
- hardcode_libdir_separator=:
- ;;
-
- sco3.2v5*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var=no
- runpath_var=LD_RUN_PATH
- hardcode_runpath_var=yes
- export_dynamic_flag_spec='${wl}-Bexport'
- ;;
-
- solaris*)
- # gcc --version < 3.0 without binutils cannot create self contained
- # shared libraries reliably, requiring libgcc.a to resolve some of
- # the object symbols generated in some cases. Libraries that use
- # assert need libgcc.a to resolve __eprintf, for example. Linking
- # a copy of libgcc.a into every shared library to guarantee resolving
- # such symbols causes other problems: According to Tim Van Holder
- # <tim.van.holder@pandora.be>, C++ libraries end up with a separate
- # (to the application) exception stack for one thing.
- no_undefined_flag=' -z defs'
- if test "$GCC" = yes; then
- case `$CC --version 2>/dev/null` in
- [12].*)
- cat <<EOF 1>&2
-
-*** Warning: Releases of GCC earlier than version 3.0 cannot reliably
-*** create self contained shared libraries on Solaris systems, without
-*** introducing a dependency on libgcc.a. Therefore, libtool is disabling
-*** -no-undefined support, which will at least allow you to build shared
-*** libraries. However, you may find that when you link such libraries
-*** into an application without using GCC, you have to manually add
-*** \`gcc --print-libgcc-file-name\` to the link command. We urge you to
-*** upgrade to a newer version of GCC. Another option is to rebuild your
-*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer.
-
-EOF
- no_undefined_flag=
- ;;
- esac
- fi
- # $CC -shared without GNU ld will not create a library from C++
- # object files and a static libstdc++, better avoid it by now
- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
- archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_shlibpath_var=no
- case $host_os in
- solaris2.[0-5] | solaris2.[0-5].*) ;;
- *) # Supported since Solaris 2.6 (maybe 2.5.1?)
- whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
- esac
- link_all_deplibs=yes
- ;;
-
- sunos4*)
- if test "x$host_vendor" = xsequent; then
- # Use $CC to link under sequent, because it throws in some extra .o
- # files that make .init and .fini sections work.
- archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
- fi
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_direct=yes
- hardcode_minus_L=yes
- hardcode_shlibpath_var=no
- ;;
-
- sysv4)
- case $host_vendor in
- sni)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=yes # is this really true???
- ;;
- siemens)
- ## LD is ld it makes a PLAMLIB
- ## CC just makes a GrossModule.
- archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
- reload_cmds='$CC -r -o $output$reload_objs'
- hardcode_direct=no
- ;;
- motorola)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=no #Motorola manual says yes, but my tests say they lie
- ;;
- esac
- runpath_var='LD_RUN_PATH'
- hardcode_shlibpath_var=no
- ;;
-
- sysv4.3*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var=no
- export_dynamic_flag_spec='-Bexport'
- ;;
-
- sysv5*)
- no_undefined_flag=' -z text'
- # $CC -shared without GNU ld will not create a library from C++
- # object files and a static libstdc++, better avoid it by now
- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
- archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
- hardcode_libdir_flag_spec=
- hardcode_shlibpath_var=no
- runpath_var='LD_RUN_PATH'
- ;;
-
- uts4*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_shlibpath_var=no
- ;;
-
- dgux*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_shlibpath_var=no
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var=no
- runpath_var=LD_RUN_PATH
- hardcode_runpath_var=yes
- ld_shlibs=yes
- fi
- ;;
-
- sysv4.2uw2*)
- archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=yes
- hardcode_minus_L=no
- hardcode_shlibpath_var=no
- hardcode_runpath_var=yes
- runpath_var=LD_RUN_PATH
- ;;
-
- sysv5uw7* | unixware7*)
- no_undefined_flag='${wl}-z ${wl}text'
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- runpath_var='LD_RUN_PATH'
- hardcode_shlibpath_var=no
- ;;
-
- *)
- ld_shlibs=no
- ;;
- esac
-fi
-echo "$ac_t""$ld_shlibs" 1>&6
-test "$ld_shlibs" = no && can_build_shared=no
-
-# Check hardcoding attributes.
-echo $ac_n "checking how to hardcode library paths into programs""... $ac_c" 1>&6
-echo "configure:3896: checking how to hardcode library paths into programs" >&5
-hardcode_action=
-if test -n "$hardcode_libdir_flag_spec" || \
- test -n "$runpath_var"; then
-
- # We can hardcode non-existant directories.
- if test "$hardcode_direct" != no &&
- # If the only mechanism to avoid hardcoding is shlibpath_var, we
- # have to relink, otherwise we might link with an installed library
- # when we should be linking with a yet-to-be-installed one
- ## test "$hardcode_shlibpath_var" != no &&
- test "$hardcode_minus_L" != no; then
- # Linking always hardcodes the temporary library directory.
- hardcode_action=relink
- else
- # We can link without hardcoding, and we can hardcode nonexisting dirs.
- hardcode_action=immediate
- fi
-else
- # We cannot hardcode anything, or else we can only hardcode existing
- # directories.
- hardcode_action=unsupported
-fi
-echo "$ac_t""$hardcode_action" 1>&6
-
-striplib=
-old_striplib=
-echo $ac_n "checking whether stripping libraries is possible""... $ac_c" 1>&6
-echo "configure:3924: checking whether stripping libraries is possible" >&5
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
- test -z "$striplib" && striplib="$STRIP --strip-unneeded"
- echo "$ac_t""yes" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
-
-# PORTME Fill in your ld.so characteristics
-echo $ac_n "checking dynamic linker characteristics""... $ac_c" 1>&6
-echo "configure:3938: checking dynamic linker characteristics" >&5
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib /usr/X11R6/lib"
-sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib /usr/X11R6/lib"
-
-case $host_os in
-aix3*)
- version_type=linux
- library_names_spec='${libname}${release}.so$versuffix $libname.a'
- shlibpath_var=LIBPATH
-
- # AIX has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}.so$major'
- ;;
-
-aix4* | aix5*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
- # AIX 5 supports IA64
- library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so'
- shlibpath_var=LD_LIBRARY_PATH
- else
- # With GCC up to 2.95.x, collect2 would create an import file
- # for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
- # development snapshots of GCC prior to 3.0.
- case $host_os in
- aix4 | aix4.[01] | aix4.[01].*)
- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
- echo ' yes '
- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
- :
- else
- can_build_shared=no
- fi
- ;;
- esac
- # AIX (on Power*) has no versioning support, so currently we can
- # not hardcode correct soname into executable. Probably we can
- # add versioning support to collect2, so additional links can
- # be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
- # instead of lib<name>.a to let people know that these are not
- # typical AIX shared libraries.
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- else
- # We preserve .a as extension for shared libraries through AIX4.2
- # and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}.so$major'
- fi
- shlibpath_var=LIBPATH
- fi
- hardcode_into_libs=yes
- ;;
-
-amigaos*)
- library_names_spec='$libname.ixlibrary $libname.a'
- # Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
- ;;
-
-beos*)
- library_names_spec='${libname}.so'
- dynamic_linker="$host_os ld.so"
- shlibpath_var=LIBRARY_PATH
- ;;
-
-bsdi4*)
- version_type=linux
- need_version=no
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- soname_spec='${libname}${release}.so$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
- export_dynamic_flag_spec=-rdynamic
- # the default ld.so.conf also contains /usr/contrib/lib and
- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
- # libtool to hard-code these into programs
- ;;
-
-cygwin* | mingw* | pw32*)
- version_type=windows
- need_version=no
- need_lib_prefix=no
- case $GCC,$host_os in
- yes,cygwin*)
- library_names_spec='$libname.dll.a'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
- postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~
- dldir=$destdir/`dirname \$dlpath`~
- test -d \$dldir || mkdir -p \$dldir~
- $install_prog .libs/$dlname \$dldir/$dlname'
- postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~
- dlpath=$dir/\$dldll~
- $rm \$dlpath'
- ;;
- yes,mingw*)
- library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g" -e "s,=/,/,g"`
- ;;
- yes,pw32*)
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/./-/g'`${versuffix}.dll'
- ;;
- *)
- library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib'
- ;;
- esac
- dynamic_linker='Win32 ld.exe'
- # FIXME: first we should search . and the directory the executable is in
- shlibpath_var=PATH
- ;;
-
-darwin* | rhapsody*)
- dynamic_linker="$host_os dyld"
- version_type=darwin
- need_lib_prefix=no
- need_version=no
- # FIXME: Relying on posixy $() will cause problems for
- # cross-compilation, but unfortunately the echo tests do not
- # yet detect zsh echo's removal of \ escapes.
- library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)'
- soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)'
- shlibpath_overrides_runpath=yes
- shlibpath_var=DYLD_LIBRARY_PATH
- ;;
-
-freebsd1*)
- dynamic_linker=no
- ;;
-
-freebsd*)
- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
- version_type=freebsd-$objformat
- case $version_type in
- freebsd-elf*)
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
- need_version=no
- need_lib_prefix=no
- ;;
- freebsd-*)
- library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
- need_version=yes
- ;;
- esac
- shlibpath_var=LD_LIBRARY_PATH
- case $host_os in
- freebsd2*)
- shlibpath_overrides_runpath=yes
- ;;
- *)
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
- esac
- ;;
-
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
- soname_spec='${libname}${release}.so$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
-hpux9* | hpux10* | hpux11*)
- # Give a soname corresponding to the major version so that dld.sl refuses to
- # link against other versions.
- dynamic_linker="$host_os dld.sl"
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- shlibpath_var=SHLIB_PATH
- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
- soname_spec='${libname}${release}.sl$major'
- # HP-UX runs *really* slowly unless shared libraries are mode 555.
- postinstall_cmds='chmod 555 $lib'
- ;;
-
-irix5* | irix6* | nonstopux*)
- case $host_os in
- nonstopux*) version_type=nonstopux ;;
- *) version_type=irix ;;
- esac
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}.so$major'
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so'
- case $host_os in
- irix5* | nonstopux*)
- libsuff= shlibsuff=
- ;;
- *)
- case $LD in # libtool.m4 will add one of these switches to LD
- *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
- *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
- *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
- *) libsuff= shlibsuff= libmagic=never-match;;
- esac
- ;;
- esac
- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
- ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
- dynamic_linker=no
- ;;
-
-# This must be Linux ELF.
-linux-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- soname_spec='${libname}${release}.so$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- # This implies no fast_install, which is unacceptable.
- # Some rework will be needed to allow for fast_install
- # before this can be enabled.
- hardcode_into_libs=yes
-
- case $host_cpu:$lt_cv_cc_64bit_output in
- powerpc64:yes | s390x:yes | sparc64:yes | x86_64:yes)
- sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /usr/X11R6/lib64"
- sys_lib_search_path_spec="/lib64 /usr/lib64 /usr/local/lib64 /usr/X11R6/lib64"
- ;;
- esac
-
- # We used to test for /lib/ld.so.1 and disable shared libraries on
- # powerpc, because MkLinux only supported shared libraries with the
- # GNU dynamic linker. Since this was broken with cross compilers,
- # most powerpc-linux boxes support dynamic linking these days and
- # people can always --disable-shared, the test was removed, and we
- # assume the GNU/Linux dynamic linker is in use.
- dynamic_linker='GNU/Linux ld.so'
-
- # Find out which ABI we are using (multilib Linux x86_64 hack).
- libsuff=
- case "$host_cpu" in
- x86_64*)
- echo '#line 4204 "configure"' > conftest.$ac_ext
- if { (eval echo configure:4205: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- case `/usr/bin/file conftest.$ac_objext` in
- *64-bit*)
- libsuff=64
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
- *)
- ;;
- esac
- sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
- sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
- ;;
-
-netbsd*)
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- dynamic_linker='NetBSD (a.out) ld.so'
- else
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
- soname_spec='${libname}${release}.so$major'
- dynamic_linker='NetBSD ld.elf_so'
- fi
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
-
-newsos6)
- version_type=linux
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-openbsd*)
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case "$host_os" in
- openbsd2.[89] | openbsd2.[89].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
- else
- shlibpath_overrides_runpath=yes
- fi
- library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-os2*)
- libname_spec='$name'
- need_lib_prefix=no
- library_names_spec='$libname.dll $libname.a'
- dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
- ;;
-
-osf3* | osf4* | osf5*)
- version_type=osf
- need_version=no
- soname_spec='${libname}${release}.so$major'
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
- hardcode_into_libs=yes
- ;;
-
-sco3.2v5*)
- version_type=osf
- soname_spec='${libname}${release}.so$major'
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-solaris*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- soname_spec='${libname}${release}.so$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- # ldd complains unless libraries are executable
- postinstall_cmds='chmod +x $lib'
- ;;
-
-sunos4*)
- version_type=sunos
- library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
- need_lib_prefix=no
- fi
- need_version=yes
- ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
- version_type=linux
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- soname_spec='${libname}${release}.so$major'
- shlibpath_var=LD_LIBRARY_PATH
- case $host_vendor in
- sni)
- shlibpath_overrides_runpath=no
- need_lib_prefix=no
- export_dynamic_flag_spec='${wl}-Blargedynsym'
- runpath_var=LD_RUN_PATH
- ;;
- siemens)
- need_lib_prefix=no
- ;;
- motorola)
- need_lib_prefix=no
- need_version=no
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
- ;;
- esac
- ;;
-
-uts4*)
- version_type=linux
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- soname_spec='${libname}${release}.so$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;