ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_help="$ac_help
+ --enable-checkmem turn on ccmalloc debugging"
+ac_help="$ac_help
+ --enable-debug turn on debugging"
+ac_help="$ac_help
+ --enable-warnings turn on compiler warnings"
+ac_help="$ac_help
+ --enable-optimizations turn on compiler optimizations (recommended for avi2swf)"
+ac_help="$ac_help
+ --disable-lame don't compile any L.A.M.E. mp3 encoding code in"
+ac_help="$ac_help
--enable-shared[=PKGS] build shared libraries [default=yes]"
ac_help="$ac_help
--enable-static[=PKGS] build static libraries [default=yes]"
+# Check whether --enable-checkmem or --disable-checkmem was given.
+if test "${enable_checkmem+set}" = set; then
+ enableval="$enable_checkmem"
+ CHECKMEM=true
+fi
+
+# Check whether --enable-debug or --disable-debug was given.
+if test "${enable_debug+set}" = set; then
+ enableval="$enable_debug"
+ DEBUG=true
+fi
+
+# Check whether --enable-warnings or --disable-warnings was given.
+if test "${enable_warnings+set}" = set; then
+ enableval="$enable_warnings"
+ ENABLE_WARNINGS=true
+fi
+
+# Check whether --enable-optimizations or --disable-optimizations was given.
+if test "${enable_optimizations+set}" = set; then
+ enableval="$enable_optimizations"
+ OPTIMIZE=true
+fi
+
+# Check whether --enable-lame or --disable-lame was given.
+if test "${enable_lame+set}" = set; then
+ enableval="$enable_lame"
+ DISABLE_LAME=true
+fi
+
+
PACKAGE=swftools
-VERSION=0.4.3-rc1
-# -Winline?
-CFLAGS="-Wparentheses -Wimplicit -Wreturn-type -O2 -fomit-frame-pointer $CFLAGS"
-CXXFLAGS="-Wparentheses -Wimplicit -Wreturn-type -O2 -fomit-frame-pointer $CXXFLAGS"
+VERSION=0.5.0_pre1
+
+WARNINGS="-Wparentheses -Wimplicit -Wreturn-type -Winline"
+if test "x$ENABLE_WARNINGS" '!=' "x";then
+ WARNINGS="-Wall -Wno-unused -Wno-format"
+fi
+
+if test "x$CHECKMEM" '!=' "x";then
+ DEBUG=yes
+fi
+if test "x$DEBUG" '!=' "x";then
+ CFLAGS="$WARNINGS -g $CFLAGS"
+ CXXFLAGS="$WARNINGS -g $CXXFLAGS"
+ STRIP="@echo debug enabled, not stripping "
+ export STRIP
+
+else if test "x$OPTIMIZE" '!=' "x"; then
+ CFLAGS="$WARNINGS -O3 -fomit-frame-pointer $CFLAGS"
+ CXXFLAGS="$WARNINGS -O3 -fomit-frame-pointer $CXXFLAGS"
+else
+ CFLAGS="$WARNINGS -O -fomit-frame-pointer $CFLAGS"
+ CXXFLAGS="$WARNINGS -O -fomit-frame-pointer $CXXFLAGS"
+fi
+fi
+#OLDGCC=1
+#if test "x$OLDGCC" '!=' "x";then
+# #CFLAGS="$CFLAGS --std=c89 -ansi -pendantic"
+# #CXXFLAGS="$CXXFLAGS --std=c89 -ansi -pendantic"
+# CFLAGS="$CFLAGS -ansi -pendantic"
+# CXXFLAGS="$CXXFLAGS -ansi -pendantic"
+#fi
+
export PACKAGE VERSION CFLAGS CXXFLAGS
ac_aux_dir=
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:730: checking host system type" >&5
+echo "configure:799: checking host system type" >&5
host_alias=$host
case "$host_alias" in
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:761: checking for $ac_word" >&5
+echo "configure:830: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:791: checking for $ac_word" >&5
+echo "configure:860: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:842: checking for $ac_word" >&5
+echo "configure:911: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:874: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:943: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 885 "configure"
+#line 954 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:890: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:959: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:916: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:985: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:921: checking whether we are using GNU C" >&5
+echo "configure:990: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:930: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:999: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:949: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1018: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
fi
- echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:981: checking how to run the C preprocessor" >&5
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
-if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- # This must be in double quotes, not single quotes, because CPP may get
- # substituted into the Makefile and "${CC-cc}" will confuse make.
- CPP="${CC-cc} -E"
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp.
- cat > conftest.$ac_ext <<EOF
-#line 996 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1002: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- :
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- CPP="${CC-cc} -E -traditional-cpp"
- cat > conftest.$ac_ext <<EOF
-#line 1013 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1019: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- :
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- CPP="${CC-cc} -nologo -E"
- cat > conftest.$ac_ext <<EOF
-#line 1030 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1036: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- :
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- CPP=/lib/cpp
-fi
-rm -f conftest*
-fi
-rm -f conftest*
-fi
-rm -f conftest*
- ac_cv_prog_CPP="$CPP"
-fi
- CPP="$ac_cv_prog_CPP"
-else
- ac_cv_prog_CPP="$CPP"
-fi
-echo "$ac_t""$CPP" 1>&6
-
for ac_prog in $CCC c++ g++ gcc CC cxx cc++ cl
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1065: checking for $ac_word" >&5
+echo "configure:1054: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1097: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
+echo "configure:1086: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
ac_ext=C
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1108 "configure"
+#line 1097 "configure"
#include "confdefs.h"
int main(){return(0);}
EOF
-if { (eval echo configure:1113: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1102: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cxx_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1139: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1128: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6
cross_compiling=$ac_cv_prog_cxx_cross
echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
-echo "configure:1144: checking whether we are using GNU C++" >&5
+echo "configure:1133: checking whether we are using GNU C++" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1153: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1142: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gxx=yes
else
ac_cv_prog_gxx=no
ac_save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS=
echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
-echo "configure:1172: checking whether ${CXX-g++} accepts -g" >&5
+echo "configure:1161: checking whether ${CXX-g++} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
fi
+
+if test "x$CHECKMEM" '!=' "x";then
+ CC="ccmalloc $CC"
+ CXX="ccmalloc $CXX"
+ #echo running again
+ #unset ac_cv_prog_CC
+ #unset ac_cv_prog_CXX
+ #AC_PROG_CC
+ #AC_PROG_CXX
+fi
+ echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
+echo "configure:1203: checking how to run the C preprocessor" >&5
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # This must be in double quotes, not single quotes, because CPP may get
+ # substituted into the Makefile and "${CC-cc}" will confuse make.
+ CPP="${CC-cc} -E"
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp.
+ cat > conftest.$ac_ext <<EOF
+#line 1218 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1224: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP="${CC-cc} -E -traditional-cpp"
+ cat > conftest.$ac_ext <<EOF
+#line 1235 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1241: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP="${CC-cc} -nologo -E"
+ cat > conftest.$ac_ext <<EOF
+#line 1252 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1258: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP=/lib/cpp
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+ ac_cv_prog_CPP="$CPP"
+fi
+ CPP="$ac_cv_prog_CPP"
+else
+ ac_cv_prog_CPP="$CPP"
+fi
+echo "$ac_t""$CPP" 1>&6
+
+
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1206: checking for $ac_word" >&5
+echo "configure:1286: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:1234: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:1314: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1272: checking for a BSD compatible install" >&5
+echo "configure:1352: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1325: checking whether ln -s works" >&5
+echo "configure:1405: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:1357: checking for Cygwin environment" >&5
+echo "configure:1437: checking for Cygwin environment" >&5
if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1362 "configure"
+#line 1442 "configure"
#include "confdefs.h"
int main() {
return __CYGWIN__;
; return 0; }
EOF
-if { (eval echo configure:1373: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1453: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_cygwin=yes
else
CYGWIN=
test "$ac_cv_cygwin" = yes && CYGWIN=yes
echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:1390: checking for mingw32 environment" >&5
+echo "configure:1470: checking for mingw32 environment" >&5
if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1395 "configure"
+#line 1475 "configure"
#include "confdefs.h"
int main() {
return __MINGW32__;
; return 0; }
EOF
-if { (eval echo configure:1402: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1482: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_mingw32=yes
else
fi
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1488: checking build system type" >&5
+echo "configure:1568: checking build system type" >&5
build_alias=$build
case "$build_alias" in
if test "$GCC" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1517: checking for ld used by GCC" >&5
+echo "configure:1597: checking for ld used by GCC" >&5
case $host in
*-*-mingw*)
# gcc leaves a trailing carriage return which upsets mingw
esac
elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1547: checking for GNU ld" >&5
+echo "configure:1627: checking for GNU ld" >&5
else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1550: checking for non-GNU ld" >&5
+echo "configure:1630: checking for non-GNU ld" >&5
fi
if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1585: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1665: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
-echo "configure:1602: checking for $LD option to reload object files" >&5
+echo "configure:1682: checking for $LD option to reload object files" >&5
if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -n "$reload_flag" && reload_flag=" $reload_flag"
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1614: checking for BSD-compatible nm" >&5
+echo "configure:1694: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
NM="$lt_cv_path_NM"
echo "$ac_t""$NM" 1>&6
-echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
-echo "configure:1652: checking how to recognise dependant libraries" >&5
+echo $ac_n "checking for a sed that does not truncate output""... $ac_c" 1>&6
+echo "configure:1732: checking for a sed that does not truncate output" >&5
+if eval "test \"`echo '$''{'lt_cv_path_SED'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_executable_p="test -f"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in sed gsed; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+ _sed_list="$_sed_list $as_dir/$ac_prog$ac_exec_ext"
+ fi
+ done
+ done
+done
+
+ # Create a temporary directory, and hook for its removal unless debugging.
+$debug ||
+{
+ trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
+ trap '{ (exit 1); exit 1; }' 1 2 13 15
+}
+
+# Create a (secure) tmp directory for tmp files.
+: ${TMPDIR=/tmp}
+{
+ tmp=`(umask 077 && mktemp -d -q "$TMPDIR/sedXXXXXX") 2>/dev/null` &&
+ test -n "$tmp" && test -d "$tmp"
+} ||
+{
+ tmp=$TMPDIR/sed$$-$RANDOM
+ (umask 077 && mkdir $tmp)
+} ||
+{
+ echo "$me: cannot create a temporary directory in $TMPDIR" >&2
+ { (exit 1); exit 1; }
+}
+ _max=0
+ _count=0
+ # Add /usr/xpg4/bin/sed as it is typically found on Solaris
+ # along with /bin/sed that truncates output.
+ for _sed in $_sed_list /usr/xpg4/bin/sed; do
+ test ! -f ${_sed} && break
+ cat /dev/null > "$tmp/sed.in"
+ _count=0
+ echo ${ECHO_N-$ac_n} "0123456789${ECHO_C-$ac_c}" >"$tmp/sed.in"
+ # Check for GNU sed and select it if it is found.
+ if "${_sed}" --version 2>&1 < /dev/null | egrep '(GNU)' > /dev/null; then
+ lt_cv_path_SED=${_sed}
+ break
+ fi
+ while true; do
+ cat "$tmp/sed.in" "$tmp/sed.in" >"$tmp/sed.tmp"
+ mv "$tmp/sed.tmp" "$tmp/sed.in"
+ cp "$tmp/sed.in" "$tmp/sed.nl"
+ echo >>"$tmp/sed.nl"
+ ${_sed} -e 's/a$//' < "$tmp/sed.nl" >"$tmp/sed.out" || break
+ cmp -s "$tmp/sed.out" "$tmp/sed.nl" || break
+ # 40000 chars as input seems more than enough
+ test $_count -gt 10 && break
+ _count=`expr $_count + 1`
+ if test $_count -gt $_max; then
+ _max=$_count
+ lt_cv_path_SED=$_sed
+ fi
+ done
+ done
+ rm -rf "$tmp"
+
+fi
+
+if test "X$SED" != "X"; then
+ lt_cv_path_SED=$SED
+else
+ SED=$lt_cv_path_SED
+fi
+echo "$ac_t""$SED" 1>&6
+
+echo $ac_n "checking how to recognise dependent libraries""... $ac_c" 1>&6
+echo "configure:1816: checking how to recognise dependent libraries" >&5
if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# This must be Linux ELF.
linux-gnu*)
case $host_cpu in
- alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
+ alpha* | hppa* | i*86 | mips | mipsel | powerpc* | sparc* | ia64* | s390* | x86_64*)
lt_cv_deplibs_check_method=pass_all ;;
*)
# glibc up to 2.1.1 does not perform some relocations on ARM
lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
lt_cv_file_magic_test_file=/lib/libc.so
;;
+ siemens)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
esac
;;
esac
deplibs_check_method=$lt_cv_deplibs_check_method
echo $ac_n "checking for object suffix""... $ac_c" 1>&6
-echo "configure:1835: checking for object suffix" >&5
+echo "configure:2002: checking for object suffix" >&5
if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int i = 1;' > conftest.$ac_ext
-if { (eval echo configure:1841: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2008: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
for ac_file in conftest.*; do
case $ac_file in
*.c) ;;
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1861: checking for executable suffix" >&5
+echo "configure:2028: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
- if { (eval echo configure:1871: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ if { (eval echo configure:2038: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
*.c | *.o | *.obj) ;;
# Check for command to grab the raw symbol name followed by C symbol from nm.
echo $ac_n "checking command to parse $NM output""... $ac_c" 1>&6
-echo "configure:1902: checking command to parse $NM output" >&5
+echo "configure:2069: checking command to parse $NM output" >&5
if eval "test \"`echo '$''{'lt_cv_sys_global_symbol_pipe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
irix* | nonstopux*)
symcode='[BCDEGRST]'
;;
+osf*)
+ symcode='[BCDEGQRST]'
+ ;;
solaris* | sysv5*)
symcode='[BDT]'
;;
int main(){nm_test_var='a';nm_test_func();return(0);}
EOF
- if { (eval echo configure:1982: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ if { (eval echo configure:2152: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
# Now try to grab the symbols.
nlist=conftest.nm
- if { (eval echo configure:1985: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5; } && test -s "$nlist"; then
+ if { (eval echo configure:2155: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5; } && test -s "$nlist"; then
# Try sorting and uniquifying the output.
if sort "$nlist" | uniq > "$nlist"T; then
mv -f "$nlist"T "$nlist"
save_CFLAGS="$CFLAGS"
LIBS="conftstm.$ac_objext"
CFLAGS="$CFLAGS$no_builtin_flag"
- if { (eval echo configure:2036: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ if { (eval echo configure:2206: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest$ac_exeext; then
pipe_works=yes
fi
LIBS="$save_LIBS"
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2085: checking for $ac_hdr" >&5
+echo "configure:2255: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2090 "configure"
+#line 2260 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2095: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2265: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
+
# Only perform the check for file, if the check method requires it
case $deplibs_check_method in
file_magic*)
if test "$file_magic_cmd" = '$MAGIC_CMD'; then
echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
-echo "configure:2130: checking for ${ac_tool_prefix}file" >&5
+echo "configure:2301: checking for ${ac_tool_prefix}file" >&5
if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$lt_cv_path_MAGIC_CMD"; then
if test -n "$ac_tool_prefix"; then
echo $ac_n "checking for file""... $ac_c" 1>&6
-echo "configure:2192: checking for file" >&5
+echo "configure:2363: checking for file" >&5
if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2263: checking for $ac_word" >&5
+echo "configure:2434: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2295: checking for $ac_word" >&5
+echo "configure:2466: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2330: checking for $ac_word" >&5
+echo "configure:2501: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2362: checking for $ac_word" >&5
+echo "configure:2533: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case $host in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 2411 "configure"' > conftest.$ac_ext
- if { (eval echo configure:2412: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ echo '#line 2582 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:2583: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -32"
rm -rf conftest*
;;
+*-*-linux*)
+ # Test if the compiler is 64bit
+ echo 'int i;' > conftest.$ac_ext
+ lt_cv_cc_64bit_output=no
+ if { (eval echo configure:2603: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *"ELF 64"*)
+ lt_cv_cc_64bit_output=yes
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:2433: checking whether the C compiler needs -belf" >&5
+echo "configure:2618: checking whether the C compiler needs -belf" >&5
if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext <<EOF
-#line 2446 "configure"
+#line 2631 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2453: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2638: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
lt_cv_cc_needs_belf=yes
else
compiler="$2"
echo $ac_n "checking for objdir""... $ac_c" 1>&6
-echo "configure:2573: checking for objdir" >&5
+echo "configure:2758: checking for objdir" >&5
rm -f .libs 2>/dev/null
mkdir .libs 2>/dev/null
if test -d .libs; then
# in isolation, and that seeing it set (from the cache) indicates that
# the associated values are set (in the cache) correctly too.
echo $ac_n "checking for $compiler option to produce PIC""... $ac_c" 1>&6
-echo "configure:2600: checking for $compiler option to produce PIC" >&5
+echo "configure:2785: checking for $compiler option to produce PIC" >&5
if eval "test \"`echo '$''{'lt_cv_prog_cc_pic'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
lt_cv_prog_cc_pic='-KPIC'
lt_cv_prog_cc_static='-Bstatic'
- if test "x$host_vendor" = xsni; then
- lt_cv_prog_cc_wl='-LD'
- else
- lt_cv_prog_cc_wl='-Wl,'
- fi
+ lt_cv_prog_cc_wl='-Wl,'
;;
uts4*)
# Check to make sure the pic_flag actually works.
echo $ac_n "checking if $compiler PIC flag $lt_cv_prog_cc_pic works""... $ac_c" 1>&6
-echo "configure:2752: checking if $compiler PIC flag $lt_cv_prog_cc_pic works" >&5
+echo "configure:2933: checking if $compiler PIC flag $lt_cv_prog_cc_pic works" >&5
if eval "test \"`echo '$''{'lt_cv_prog_cc_pic_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC"
cat > conftest.$ac_ext <<EOF
-#line 2759 "configure"
+#line 2940 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2766: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2947: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
case $host_os in
hpux9* | hpux10* | hpux11*)
fi
echo $ac_n "checking if $compiler static flag $lt_cv_prog_cc_static works""... $ac_c" 1>&6
-echo "configure:2818: checking if $compiler static flag $lt_cv_prog_cc_static works" >&5
+echo "configure:2999: checking if $compiler static flag $lt_cv_prog_cc_static works" >&5
if eval "test \"`echo '$''{'lt_cv_prog_cc_static_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
save_LDFLAGS="$LDFLAGS"
LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static"
cat > conftest.$ac_ext <<EOF
-#line 2826 "configure"
+#line 3007 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2833: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3014: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
lt_cv_prog_cc_static_works=yes
else
# Check to see if options -o and -c are simultaneously supported by compiler
echo $ac_n "checking if $compiler supports -c -o file.$ac_objext""... $ac_c" 1>&6
-echo "configure:2860: checking if $compiler supports -c -o file.$ac_objext" >&5
+echo "configure:3041: checking if $compiler supports -c -o file.$ac_objext" >&5
if eval "test \"`echo '$''{'lt_cv_compiler_c_o'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"
compiler_c_o=no
-if { (eval echo configure:2879: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
+if { (eval echo configure:3060: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
if test -s out/conftest.err; then
if test x"$compiler_c_o" = x"yes"; then
# Check to see if we can write to a .lo
echo $ac_n "checking if $compiler supports -c -o file.lo""... $ac_c" 1>&6
-echo "configure:2908: checking if $compiler supports -c -o file.lo" >&5
+echo "configure:3089: checking if $compiler supports -c -o file.lo" >&5
if eval "test \"`echo '$''{'lt_cv_compiler_o_lo'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
save_objext="$ac_objext"
ac_objext=lo
cat > conftest.$ac_ext <<EOF
-#line 2919 "configure"
+#line 3100 "configure"
#include "confdefs.h"
int main() {
int some_variable = 0;
; return 0; }
EOF
-if { (eval echo configure:2926: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3107: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
if test "$compiler_c_o" = no && test "$need_locks" != no; then
# do not overwrite the value of need_locks provided by the user
echo $ac_n "checking if we can lock with hard links""... $ac_c" 1>&6
-echo "configure:2957: checking if we can lock with hard links" >&5
+echo "configure:3138: checking if we can lock with hard links" >&5
hard_links=yes
$rm conftest*
ln conftest.a conftest.b 2>/dev/null && hard_links=no
if test "$GCC" = yes; then
# Check to see if options -fno-rtti -fno-exceptions are supported by compiler
echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions""... $ac_c" 1>&6
-echo "configure:2976: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+echo "configure:3157: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
echo "int some_variable = 0;" > conftest.$ac_ext
save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext"
compiler_rtti_exceptions=no
cat > conftest.$ac_ext <<EOF
-#line 2982 "configure"
+#line 3163 "configure"
#include "confdefs.h"
int main() {
int some_variable = 0;
; return 0; }
EOF
-if { (eval echo configure:2989: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3170: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
# See if the linker supports building shared libraries.
echo $ac_n "checking whether the linker ($LD) supports shared libraries""... $ac_c" 1>&6
-echo "configure:3016: checking whether the linker ($LD) supports shared libraries" >&5
+echo "configure:3197: checking whether the linker ($LD) supports shared libraries" >&5
allow_undefined_flag=
no_undefined_flag=
# If the export-symbols file already is a .def file (1st line
# is EXPORTS), use it as is.
# If DATA tags from a recent dlltool are present, honour them!
- archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then
+ archive_expsym_cmds='if test "x`sed 1q $export_symbols`" = xEXPORTS; then
cp $export_symbols $output_objdir/$soname-def;
else
echo EXPORTS > $output_objdir/$soname-def;
set dummy \$symbol;
case \$# in
2) echo " \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
+ 4) echo " \$2 \$3 \$4 ; " >> $output_objdir/$soname-def; _lt_hint=`expr \$_lt_hint - 1`;;
*) echo " \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;;
esac;
_lt_hint=`expr 1 + \$_lt_hint`;
# need to do runtime linking.
case $host_os in aix4.[23]|aix4.[23].*|aix5*)
for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ case $ld_flag in
+ *-brtl*)
aix_use_runtimelinking=yes
break
- fi
+ ;;
+ esac
done
esac
# cross-compilation, but unfortunately the echo tests do not
# yet detect zsh echo's removal of \ escapes. Also zsh mangles
# `"' quotes if we put them in here... so don't!
- archive_cmds='$nonopt $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring'
+ archive_cmds='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs && $CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib ${lib}-master.o $deplibs$linker_flags $(test .$module != .yes && echo -install_name $rpath/$soname $verstring)'
# We need to add '_' to the symbols in $export_symbols first
#archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols'
hardcode_direct=yes
irix5* | irix6* | nonstopux*)
if test "$GCC" = yes; then
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
else
archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+ hardcode_libdir_flag_spec='-rpath $libdir'
fi
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator=:
link_all_deplibs=yes
;;
hardcode_direct=yes
hardcode_shlibpath_var=no
if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
export_dynamic_flag_spec='${wl}-E'
else
hardcode_libdir_flag_spec='-R$libdir'
;;
*)
- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
;;
esac
;;
sysv4)
- if test "x$host_vendor" = xsno; then
- archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=yes # is this really true???
- else
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=no #Motorola manual says yes, but my tests say they lie
- fi
+ case $host_vendor in
+ sni)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes # is this really true???
+ ;;
+ siemens)
+ ## LD is ld it makes a PLAMLIB
+ ## CC just makes a GrossModule.
+ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+ reload_cmds='$CC -r -o $output$reload_objs'
+ hardcode_direct=no
+ ;;
+ motorola)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+ ;;
+ esac
runpath_var='LD_RUN_PATH'
hardcode_shlibpath_var=no
;;
# Check hardcoding attributes.
echo $ac_n "checking how to hardcode library paths into programs""... $ac_c" 1>&6
-echo "configure:3701: checking how to hardcode library paths into programs" >&5
+echo "configure:3896: checking how to hardcode library paths into programs" >&5
hardcode_action=
if test -n "$hardcode_libdir_flag_spec" || \
test -n "$runpath_var"; then
striplib=
old_striplib=
echo $ac_n "checking whether stripping libraries is possible""... $ac_c" 1>&6
-echo "configure:3729: checking whether stripping libraries is possible" >&5
+echo "configure:3924: checking whether stripping libraries is possible" >&5
if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
test -z "$striplib" && striplib="$STRIP --strip-unneeded"
# PORTME Fill in your ld.so characteristics
echo $ac_n "checking dynamic linker characteristics""... $ac_c" 1>&6
-echo "configure:3743: checking dynamic linker characteristics" >&5
+echo "configure:3938: checking dynamic linker characteristics" >&5
library_names_spec=
libname_spec='lib$name'
soname_spec=
shlibpath_overrides_runpath=unknown
version_type=none
dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+sys_lib_dlsearch_path_spec="/lib /usr/lib /usr/X11R6/lib"
+sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib /usr/X11R6/lib"
case $host_os in
aix3*)
aix4* | aix5*)
version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ hardcode_into_libs=yes
if test "$host_cpu" = ia64; then
# AIX 5 supports IA64
library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so'
fi
shlibpath_var=LIBPATH
fi
+ hardcode_into_libs=yes
;;
amigaos*)
;;
yes,mingw*)
library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"`
+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g" -e "s,=/,/,g"`
;;
yes,pw32*)
library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/./-/g'`${versuffix}.dll'
# before this can be enabled.
hardcode_into_libs=yes
+ case $host_cpu:$lt_cv_cc_64bit_output in
+ powerpc64:yes | s390x:yes | sparc64:yes | x86_64:yes)
+ sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /usr/X11R6/lib64"
+ sys_lib_search_path_spec="/lib64 /usr/lib64 /usr/local/lib64 /usr/X11R6/lib64"
+ ;;
+ esac
+
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
+
+ # Find out which ABI we are using (multilib Linux x86_64 hack).
+ libsuff=
+ case "$host_cpu" in
+ x86_64*)
+ echo '#line 4204 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:4205: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *64-bit*)
+ libsuff=64
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+ *)
+ ;;
+ esac
+ sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
+ sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
;;
netbsd*)
osf3* | osf4* | osf5*)
version_type=osf
need_version=no
- soname_spec='${libname}${release}.so'
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
+ soname_spec='${libname}${release}.so$major'
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ hardcode_into_libs=yes
;;
sco3.2v5*)
case $host_vendor in
sni)
shlibpath_overrides_runpath=no
+ need_lib_prefix=no
+ export_dynamic_flag_spec='${wl}-Blargedynsym'
+ runpath_var=LD_RUN_PATH
+ ;;
+ siemens)
+ need_lib_prefix=no
;;
motorola)
need_lib_prefix=no
# Report the final consequences.
echo $ac_n "checking if libtool supports shared libraries""... $ac_c" 1>&6
-echo "configure:4143: checking if libtool supports shared libraries" >&5
+echo "configure:4376: checking if libtool supports shared libraries" >&5
echo "$ac_t""$can_build_shared" 1>&6
echo $ac_n "checking whether to build shared libraries""... $ac_c" 1>&6
-echo "configure:4147: checking whether to build shared libraries" >&5
+echo "configure:4380: checking whether to build shared libraries" >&5
test "$can_build_shared" = "no" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
echo "$ac_t""$enable_shared" 1>&6
echo $ac_n "checking whether to build static libraries""... $ac_c" 1>&6
-echo "configure:4170: checking whether to build static libraries" >&5
+echo "configure:4403: checking whether to build static libraries" >&5
# Make sure either enable_shared or enable_static is yes.
test "$enable_shared" = yes || enable_static=yes
echo "$ac_t""$enable_static" 1>&6
*)
echo $ac_n "checking for shl_load""... $ac_c" 1>&6
-echo "configure:4211: checking for shl_load" >&5
+echo "configure:4444: checking for shl_load" >&5
if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4216 "configure"
+#line 4449 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char shl_load(); below. */
; return 0; }
EOF
-if { (eval echo configure:4239: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4472: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_shl_load=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
-echo "configure:4257: checking for shl_load in -ldld" >&5
+echo "configure:4490: checking for shl_load in -ldld" >&5
ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldld $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4265 "configure"
+#line 4498 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
shl_load()
; return 0; }
EOF
-if { (eval echo configure:4276: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4509: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for dlopen""... $ac_c" 1>&6
-echo "configure:4295: checking for dlopen" >&5
+echo "configure:4528: checking for dlopen" >&5
if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4300 "configure"
+#line 4533 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char dlopen(); below. */
; return 0; }
EOF
-if { (eval echo configure:4323: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4556: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_dlopen=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "configure:4341: checking for dlopen in -ldl" >&5
+echo "configure:4574: checking for dlopen in -ldl" >&5
ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4349 "configure"
+#line 4582 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dlopen()
; return 0; }
EOF
-if { (eval echo configure:4360: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4593: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for dlopen in -lsvld""... $ac_c" 1>&6
-echo "configure:4379: checking for dlopen in -lsvld" >&5
+echo "configure:4612: checking for dlopen in -lsvld" >&5
ac_lib_var=`echo svld'_'dlopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsvld $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4387 "configure"
+#line 4620 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dlopen()
; return 0; }
EOF
-if { (eval echo configure:4398: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4631: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6
-echo "configure:4417: checking for dld_link in -ldld" >&5
+echo "configure:4650: checking for dld_link in -ldld" >&5
ac_lib_var=`echo dld'_'dld_link | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldld $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4425 "configure"
+#line 4658 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dld_link()
; return 0; }
EOF
-if { (eval echo configure:4436: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4669: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
LIBS="$lt_cv_dlopen_libs $LIBS"
echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6
-echo "configure:4492: checking whether a program can dlopen itself" >&5
+echo "configure:4725: checking whether a program can dlopen itself" >&5
if eval "test \"`echo '$''{'lt_cv_dlopen_self'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
-#line 4502 "configure"
+#line 4735 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
exit (status);
}
EOF
- if { (eval echo configure:4563: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then
+ if { (eval echo configure:4796: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then
(./conftest; exit; ) 2>/dev/null
lt_status=$?
case x$lt_status in
if test "x$lt_cv_dlopen_self" = xyes; then
LDFLAGS="$LDFLAGS $link_static_flag"
echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6
-echo "configure:4586: checking whether a statically linked program can dlopen itself" >&5
+echo "configure:4819: checking whether a statically linked program can dlopen itself" >&5
if eval "test \"`echo '$''{'lt_cv_dlopen_self_static'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
-#line 4596 "configure"
+#line 4829 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
exit (status);
}
EOF
- if { (eval echo configure:4657: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then
+ if { (eval echo configure:4890: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then
(./conftest; exit; ) 2>/dev/null
lt_status=$?
case x$lt_status in
# systems, -lgcc has to come before -lc. If gcc already passes -lc
# to ld, don't add -lc before -lgcc.
echo $ac_n "checking whether -lc should be explicitly linked in""... $ac_c" 1>&6
-echo "configure:4706: checking whether -lc should be explicitly linked in" >&5
+echo "configure:4939: checking whether -lc should be explicitly linked in" >&5
if eval "test \"`echo '$''{'lt_cv_archive_cmds_need_lc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
$rm conftest*
echo 'static int dummy;' > conftest.$ac_ext
- if { (eval echo configure:4713: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ if { (eval echo configure:4946: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
soname=conftest
lib=conftest
libobjs=conftest.$ac_objext
libname=conftest
save_allow_undefined_flag=$allow_undefined_flag
allow_undefined_flag=
- if { (eval echo configure:4726: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\") 1>&5; (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5; }
+ if { (eval echo configure:4959: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\") 1>&5; (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5; }
then
lt_cv_archive_cmds_need_lc=no
else
# Now quote all the things that may contain metacharacters while being
# careful not to overquote the AC_SUBSTed values. We take copies of the
# variables and quote the copies for generation of the libtool script.
- for var in echo old_CC old_CFLAGS \
+ for var in echo old_CC old_CFLAGS SED \
AR AR_FLAGS CC LD LN_S NM SHELL \
reload_flag reload_cmds wl \
pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
+# A sed that does not truncate output.
+SED=$lt_SED
+
# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="sed -e s/^X//"
+Xsed="${SED} -e s/^X//"
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5312: checking for $ac_word" >&5
+echo "configure:5548: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_UNCOMPRESS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:5345: checking for executable suffix" >&5
+echo "configure:5581: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
- if { (eval echo configure:5355: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ if { (eval echo configure:5591: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
*.c | *.o | *.obj) ;;
ac_exeext=$EXEEXT
+
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:5620: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+ case $nonopt in
+ NONE)
+ if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+ else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+ fi ;;
+ *) host_alias=$nonopt ;;
+ esac ;;
+esac
+
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+
+
+echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
+echo "configure:5643: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
+ ac_cv_exeext=.exe
+else
+ rm -f conftest*
+ echo 'int main () { return 0; }' > conftest.$ac_ext
+ ac_cv_exeext=
+ if { (eval echo configure:5653: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ for file in conftest.*; do
+ case $file in
+ *.c | *.o | *.obj) ;;
+ *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
+ esac
+ done
+ else
+ { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
+ fi
+ rm -f conftest*
+ test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
+fi
+fi
+
+EXEEXT=""
+test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
+echo "$ac_t""${ac_cv_exeext}" 1>&6
+ac_exeext=$EXEEXT
+
+
+echo $ac_n "checking for target system""... $ac_c" 1>&6
+echo "configure:5675: checking for target system" >&5
+CYGWIN=
+MINGW=
+case $host_os in
+ *cygwin* ) CYGWIN=yes;;
+ *mingw* ) MINGW=yes;;
+esac
+
+AR=ar
+if test "x$MINGW" = "xyes"; then
+ #fix for the debian distribution of mingw
+ if test -x "/usr/i586-mingw32msvc/bin/ar";then
+ AR="/usr/i586-mingw32msvc/bin/ar"
+ fi
+ if test -x "/usr/i586-mingw32msvc/bin/ranlib";then
+ RANLIB="/usr/i586-mingw32msvc/bin/ranlib"
+ fi
+ #fix for the gentoo distribution of mingw
+ if test -x "/opt/xmingw/bin/i386-mingw32msvc-ar";then
+ AR="/opt/xmingw/bin/i386-mingw32msvc-ar"
+ fi
+ if test -x "/opt/xmingw/bin/i386-mingw32msvc-ranlib";then
+ RANLIB="/opt/xmingw/bin/i386-mingw32msvc-ranlib"
+ fi
+ if test -x "/opt/xmingw/bin/i386-mingw32msvc-strip";then
+ STRIP="/opt/xmingw/bin/i386-mingw32msvc-strip"
+ fi
+fi
+
+
+
+if test "x${CYGWIN}" = "xyes"; then
+ cat >> confdefs.h <<EOF
+#define CYGWIN 1
+EOF
+
+ echo "$ac_t""cygwin" 1>&6
+else
+ if test "x${MINGW}" = "xyes"; then
+ cat >> confdefs.h <<EOF
+#define MINGW 1
+EOF
+
+ WIN32=1
+ cat >> confdefs.h <<EOF
+#define WIN32 1
+EOF
+
+ LIBS="$LIBS -lws2_32"
+ echo "$ac_t""mingw" 1>&6
+ else
+ LINUX=1
+ export LINUX
+ cat >> confdefs.h <<EOF
+#define LINUX 1
+EOF
+
+ echo "$ac_t""" 1>&6
+ fi
+fi
+
+
+if test "x${MINGW}" != "xyes"; then
+ cat >> confdefs.h <<EOF
+#define O_BINARY 0
+EOF
+
+fi
+# The following tries to make use of includes and libraries in
+# /usr/local, too. Notice: A -I/usr/local/include might break
+# things (MingW, cross-compiling etc.) in the same way as -I/usr/include,
+# especially on systems which link /usr/local to /usr, so it has yet
+# to be seen how useful this is.
+if test -d /usr/local/lib; then
+ LDFLAGS="$LDFLAGS -L/usr/local/lib"
+fi
+if test -d /usr/local/include; then
+# Leave that alone. It's causing trouble e.g. with gcc 3.2 on gentoo.
+# CPPFLAGS="$CPPFLAGS -I/usr/local/include"
+ echo > /dev/null
+fi
+if test "$prefix" != "NONE" -a "$prefix" != "/usr/local" -a "$prefix" != "/usr/local/"; then
+ # if the user has a special prefix (like /opt), there might also be $prefix/lib
+ # and $prefix/include, which should be included in our search paths for libraries
+ # and includes.
+ LDFLAGS="$LDFLAGS -L${libdir}"
+ CPPFLAGS="$CPPFLAGS -I${includedir}"
+ # TODO- test whether gcc still works after this
+fi
+
echo $ac_n "checking for sin in -lm""... $ac_c" 1>&6
-echo "configure:5377: checking for sin in -lm" >&5
+echo "configure:5766: checking for sin in -lm" >&5
ac_lib_var=`echo m'_'sin | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5385 "configure"
+#line 5774 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
sin()
; return 0; }
EOF
-if { (eval echo configure:5396: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5785: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for deflate in -lz""... $ac_c" 1>&6
-echo "configure:5427: checking for deflate in -lz" >&5
+echo "configure:5816: checking for deflate in -lz" >&5
ac_lib_var=`echo z'_'deflate | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lz $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5435 "configure"
+#line 5824 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
deflate()
; return 0; }
EOF
-if { (eval echo configure:5446: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5835: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
-echo "Error: The zlib compression library is required."
- DISABLEPDF2SWF=true;
+DISABLEPNG2SWF=true;
MISSINGLIBS="${MISSINGLIBS} zlib"
- exit;
+ ZLIBMISSING=true;
fi
echo $ac_n "checking for jpeg_write_raw_data in -ljpeg""... $ac_c" 1>&6
-echo "configure:5479: checking for jpeg_write_raw_data in -ljpeg" >&5
+echo "configure:5867: checking for jpeg_write_raw_data in -ljpeg" >&5
ac_lib_var=`echo jpeg'_'jpeg_write_raw_data | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ljpeg $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5487 "configure"
+#line 5875 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
jpeg_write_raw_data()
; return 0; }
EOF
-if { (eval echo configure:5498: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5886: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for T1_LoadFont in -lt1""... $ac_c" 1>&6
-echo "configure:5530: checking for T1_LoadFont in -lt1" >&5
+echo "configure:5918: checking for T1_LoadFont in -lt1" >&5
ac_lib_var=`echo t1'_'T1_LoadFont | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lt1 $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5538 "configure"
+#line 5926 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
T1_LoadFont()
; return 0; }
EOF
-if { (eval echo configure:5549: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5937: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
DISABLEPDF2SWF=true;
- MISSINGLIBS="${MISSINGLIBS} T1lib"
+ MISSINGLIBS="${MISSINGLIBS} t1lib"
fi
+for ac_prog in freetype-config
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:5974: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_FREETYPE_CONFIG'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$FREETYPE_CONFIG"; then
+ ac_cv_prog_FREETYPE_CONFIG="$FREETYPE_CONFIG" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_FREETYPE_CONFIG="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+FREETYPE_CONFIG="$ac_cv_prog_FREETYPE_CONFIG"
+if test -n "$FREETYPE_CONFIG"; then
+ echo "$ac_t""$FREETYPE_CONFIG" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+test -n "$FREETYPE_CONFIG" && break
+done
+
+OLDCPPFLAGS="${CPPFLAGS}"
+OLDLIBS="${LIBS}"
+if test "x${FREETYPE_CONFIG}" != "x"; then
+ CPPFLAGS="$CFLAGS "`freetype-config --cflags`
+else if test -d /usr/include/freetype2; then
+ CPPFLAGS="$CFLAGS -I/usr/include/freetype2"
+else if test -d /usr/local/include/freetype2; then
+ CPPFLAGS="$CFLAGS -I/usr/local/include/freetype2"
+fi
+fi
+fi
+echo $ac_n "checking for FT_Init_FreeType in -lfreetype""... $ac_c" 1>&6
+echo "configure:6015: checking for FT_Init_FreeType in -lfreetype" >&5
+ac_lib_var=`echo freetype'_'FT_Init_FreeType | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lfreetype $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 6023 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char FT_Init_FreeType();
+
+int main() {
+FT_Init_FreeType()
+; return 0; }
+EOF
+if { (eval echo configure:6034: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ HAVE_LIB_FREETYPE=1
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+for ac_hdr in freetype/freetype.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:6058: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 6063 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:6068: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+ HAVE_FREETYPE_FREETYPE_H=1
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+if test "x${HAVE_LIB_FREETYPE}" != "x";then
+if test "x${HAVE_FREETYPE_FREETYPE_H}" != "x";then
+ HAVE_FREETYPE=1
+fi
+fi
+if test "x${HAVE_FREETYPE}" != "x"; then
+ if test "x{$FREETYPE_CONFIG}" != "x"; then
+ LIBS="$LIBS "`freetype-config --libs`
+ else
+ LIBS="$LIBS -lfreetype"
+ fi
+ cat >> confdefs.h <<EOF
+#define HAVE_FREETYPE 1
+EOF
+
+ cat >> confdefs.h <<EOF
+#define USE_FREETYPE 1
+EOF
+ # for ttf2tp1
+else
+ CPPFLAGS=${OLDCPPFLAGS}
+ LIBS=${OLDLIBS}
+fi
+
+
+
+
echo $ac_n "checking for byte order""... $ac_c" 1>&6
-echo "configure:5582: checking for byte order" >&5
+echo "configure:6122: checking for byte order" >&5
if test "$cross_compiling" = yes; then
CROSSCOMPILE=1
else
cat > conftest.$ac_ext <<EOF
-#line 5587 "configure"
+#line 6127 "configure"
#include "confdefs.h"
int main (int argc, char *argv[])
}
EOF
-if { (eval echo configure:5597: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6137: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
BIGENDIAN=1
else
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:5641: checking host system type" >&5
+echo "configure:6181: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:5662: checking target system type" >&5
+echo "configure:6202: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:5680: checking build system type" >&5
+echo "configure:6220: checking build system type" >&5
build_alias=$build
case "$build_alias" in
program_prefix=${target_alias}-
echo $ac_n "checking for byte order, try 2""... $ac_c" 1>&6
-echo "configure:5703: checking for byte order, try 2" >&5
+echo "configure:6243: checking for byte order, try 2" >&5
case "${target}" in
*86* | *-pc-* )
LITTLEENDIAN=1
echo $ac_n "checking whether system() can handle command substitution""... $ac_c" 1>&6
-echo "configure:5739: checking whether system() can handle command substitution" >&5
+echo "configure:6279: checking whether system() can handle command substitution" >&5
if test "$cross_compiling" = yes; then
CROSSCOMPILE=1
else
cat > conftest.$ac_ext <<EOF
-#line 5744 "configure"
+#line 6284 "configure"
#include "confdefs.h"
#include "stdlib.h"
}
EOF
-if { (eval echo configure:5754: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6294: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
OK=OK
else
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
ac_header_dirent=no
for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6
-echo "configure:5814: checking for $ac_hdr that defines DIR" >&5
+echo "configure:6353: checking for $ac_hdr that defines DIR" >&5
if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5819 "configure"
+#line 6358 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <$ac_hdr>
DIR *dirp = 0;
; return 0; }
EOF
-if { (eval echo configure:5827: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6366: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "ac_cv_header_dirent_$ac_safe=yes"
else
# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
if test $ac_header_dirent = dirent.h; then
echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6
-echo "configure:5852: checking for opendir in -ldir" >&5
+echo "configure:6391: checking for opendir in -ldir" >&5
ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldir $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5860 "configure"
+#line 6399 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:5871: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6410: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6
-echo "configure:5893: checking for opendir in -lx" >&5
+echo "configure:6432: checking for opendir in -lx" >&5
ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lx $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5901 "configure"
+#line 6440 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:5912: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6451: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:5935: checking for ANSI C header files" >&5
+echo "configure:6474: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5940 "configure"
+#line 6479 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5948: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6487: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 5965 "configure"
+#line 6504 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 5983 "configure"
+#line 6522 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 6004 "configure"
+#line 6543 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:6015: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6554: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
- for ac_hdr in zlib.h jpeglib.h t1lib.h sys/stat.h sys/types.h dirent.h sys/bsdtypes.h sys/ndir.h sys/dir.h ndir.h
+ for ac_hdr in zlib.h jpeglib.h t1lib.h assert.h signal.h pthread.h sys/stat.h sys/types.h dirent.h sys/bsdtypes.h sys/ndir.h sys/dir.h ndir.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:6042: checking for $ac_hdr" >&5
+echo "configure:6581: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6047 "configure"
+#line 6586 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6052: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6591: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
MISSINGLIBS="${MISSINGLIBS} t1lib.h"
fi
if test "x${ac_cv_header_zlib_h}" != "xyes"; then
- DISABLEPDF2SWF=true;
+ DISABLEPNG2SWF=true;
MISSINGLIBS="${MISSINGLIBS} zlib.h"
+ ZLIBMISSING=true;
fi
cat >> confdefs.h <<EOF
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:6108: checking for working const" >&5
+echo "configure:6648: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6113 "configure"
+#line 6653 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:6162: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6702: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:6183: checking for inline" >&5
+echo "configure:6723: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 6190 "configure"
+#line 6730 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:6197: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6737: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
esac
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:6223: checking for off_t" >&5
+echo "configure:6763: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6228 "configure"
+#line 6768 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:6256: checking for size_t" >&5
+echo "configure:6796: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6261 "configure"
+#line 6801 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking whether struct tm is in sys/time.h or time.h""... $ac_c" 1>&6
-echo "configure:6289: checking whether struct tm is in sys/time.h or time.h" >&5
+echo "configure:6829: checking whether struct tm is in sys/time.h or time.h" >&5
if eval "test \"`echo '$''{'ac_cv_struct_tm'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6294 "configure"
+#line 6834 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <time.h>
struct tm *tp; tp->tm_sec;
; return 0; }
EOF
-if { (eval echo configure:6302: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6842: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_tm=time.h
else
fi
echo $ac_n "checking for boolean""... $ac_c" 1>&6
-echo "configure:6323: checking for boolean" >&5
+echo "configure:6863: checking for boolean" >&5
if eval "test \"`echo '$''{'ac_cv_type_boolean'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6328 "configure"
+#line 6868 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for bool""... $ac_c" 1>&6
-echo "configure:6356: checking for bool" >&5
+echo "configure:6896: checking for bool" >&5
if eval "test \"`echo '$''{'ac_cv_type_bool'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6361 "configure"
+#line 6901 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
- for ac_func in popen mkstemp stat lrand48 rand srand48 srand
+ for ac_func in popen mkstemp stat lrand48 rand srand48 srand bcopy bzero
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6392: checking for $ac_func" >&5
+echo "configure:6932: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6397 "configure"
+#line 6937 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6420: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6960: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
+for ac_prog in avifile-config
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:6990: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AVIFILE_CONFIG'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$AVIFILE_CONFIG"; then
+ ac_cv_prog_AVIFILE_CONFIG="$AVIFILE_CONFIG" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_AVIFILE_CONFIG="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+AVIFILE_CONFIG="$ac_cv_prog_AVIFILE_CONFIG"
+if test -n "$AVIFILE_CONFIG"; then
+ echo "$ac_t""$AVIFILE_CONFIG" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+test -n "$AVIFILE_CONFIG" && break
+done
+
echo $ac_n "checking whether we can compile the avifile test program""... $ac_c" 1>&6
-echo "configure:6446: checking whether we can compile the avifile test program" >&5
+echo "configure:7020: checking whether we can compile the avifile test program" >&5
-cat > conftest.$ac_ext << EOF
+cat > conftest.cpp << EOF
#include <avifile/version.h>
#if (AVIFILE_MAJOR_VERSION == 0) && (AVIFILE_MINOR_VERSION>=6)
#include <avifile.h>
#define Bpp bpp
#endif
-int main (int argc, char*argv)
+int test()
{
IAviReadFile* player;
IAviReadStream* astream;
uint_t a,b;
astream->ReadFrames(0,0,0,a,b);
}
+int main (int argc, char*argv)
+{
+ return 0;
+}
EOF
-ac_link='$CXX $CPPFLAGS $CXXFLAGS `avifile-config --cflags` `avifile-config --libs` conftest.$ac_ext -o conftest${ac_exeext}'
-if { (eval echo avi2swf.m4:71: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- echo "$ac_t""yes" 1>&6
- AVIFILE=true
- export AVIFILE
- cat >> confdefs.h <<EOF
+if test "x$AVIFILE_CONFIG" '!=' "x";then
+ ac_link='$CXX $CPPFLAGS $CXXFLAGS `$AVIFILE_CONFIG --cflags` `$AVIFILE_CONFIG --libs` conftest.cpp -o conftest${ac_exeext}'
+ if { (eval echo avi2swf.m4:71: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && ./conftest${ac_exeext}; then
+ echo "$ac_t""yes" 1>&6
+ AVIFILE=true
+ export AVIFILE
+ cat >> confdefs.h <<EOF
#define AVIFILE true
EOF
+ else
+ echo "configure: failed program was:" >&5
+ cat conftest.cpp >&5
+ echo "$ac_t""no" 1>&6
+ fi
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- echo "$ac_t""no" 1>&6
+ echo "$ac_t""no" 1>&6
fi
rm -f conftest*
avi2swf=
fi
+if test "x${DISABLE_LAME}" = "xtrue"; then
+ echo "*" Disabling lame support...
+ lame_objects=
+else
+ cat >> confdefs.h <<EOF
+#define HAVE_LAME 1
+EOF
+
+ lame_objects='$(lame_objects_2)'
+fi
+
+
if test "x${UNCOMPRESS}" = "xgzip"; then
cat >> confdefs.h <<EOF
#define USE_GZIP 1
fi
-JPEG2SWF='jpeg2swf$(EXEEXT)'
+JPEG2SWF='jpeg2swf$(E)'
export JPEG2SWF
+PNG2SWF='png2swf$(E)'
+export PNG2SWF
if test "x${DISABLEPDF2SWF}" = "xtrue"; then
echo "***************************************************"
echo "The following headers/libraries are missing: " ${MISSINGLIBS}
- echo "Disabling pdf2swf tool..."
- rm -f pdf2swf/Makefile
- echo all install uninstall clean: > pdf2swf/Makefile
+ if test "x${DISABLEPDF2SWF}" = "xtrue"; then
+ echo "Disabling pdf2swf tool..."
+ rm -f pdf2swf/Makefile
+ echo all install uninstall clean: > pdf2swf/Makefile
+ fi
if test "x${DISABLEJPEG2SWF}" = "xtrue"; then
echo "Disabling jpeg2swf tool..."
JPEG2SWF=
export JPEG2SWF
fi
+ if test "x${DISABLEPNG2SWF}" = "xtrue"; then
+ echo "Disabling png2swf tool..."
+ PNG2SWF=
+ export PNG2SWF
+ fi
+ if test "x${ZLIBMISSING}" = "xtrue"; then
+ echo
+ echo "Warning! Without zlib, you will not be able to read"
+ echo "or write compressed Flash MX files!"
+ fi
echo "***************************************************"
- FILES="./release Makefile.common ${avi2swf} Makefile lib/lame/Makefile lib/Makefile src/Makefile swfs/Makefile"
+ FILES="./release Makefile.common ${avi2swf} Makefile lib/lame/Makefile lib/Makefile lib/action/Makefile src/Makefile swfs/Makefile"
else
- FILES="./release Makefile.common ${avi2swf} Makefile lib/lame/Makefile lib/Makefile src/Makefile pdf2swf/Makefile pdf2swf/xpdf/Makefile pdf2swf/ttf2pt1/Makefile swfs/Makefile"
+ FILES="./release Makefile.common ${avi2swf} Makefile lib/lame/Makefile lib/Makefile lib/action/Makefile src/Makefile pdf2swf/Makefile pdf2swf/xpdf/Makefile pdf2swf/ttf2pt1/Makefile swfs/Makefile"
fi
-AR=ar
-
trap '' 1 2 15
cat > confcache <<\EOF
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
+s%@STRIP@%$STRIP%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@host_cpu@%$host_cpu%g
s%@host_vendor@%$host_vendor%g
s%@host_os@%$host_os%g
s%@CC@%$CC%g
-s%@CPP@%$CPP%g
s%@CXX@%$CXX%g
+s%@CPP@%$CPP%g
s%@RANLIB@%$RANLIB%g
s%@SET_MAKE@%$SET_MAKE%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@OBJEXT@%$OBJEXT%g
s%@EXEEXT@%$EXEEXT%g
s%@ECHO@%$ECHO%g
-s%@STRIP@%$STRIP%g
s%@LIBTOOL@%$LIBTOOL%g
s%@UNCOMPRESS@%$UNCOMPRESS%g
+s%@AR@%$AR%g
+s%@FREETYPE_CONFIG@%$FREETYPE_CONFIG%g
s%@target@%$target%g
s%@target_alias@%$target_alias%g
s%@target_cpu@%$target_cpu%g
s%@PACKAGE@%$PACKAGE%g
s%@VERSION@%$VERSION%g
s%@HAVE_UNISTD_H@%$HAVE_UNISTD_H%g
+s%@AVIFILE_CONFIG@%$AVIFILE_CONFIG%g
+s%@lame_objects@%$lame_objects%g
s%@USE_GZIP@%$USE_GZIP%g
s%@JPEG2SWF@%$JPEG2SWF%g
-s%@AR@%$AR%g
+s%@PNG2SWF@%$PNG2SWF%g
CEOF
EOF
rm -fr confdefs* $ac_clean_files
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+
+if test "x${srcdir}" != "x."; then
+ echo "Warning: --srcdir is not supported"
+fi